Proč pracovat u nás?


V Innomotics víme, že svět nelze změnit jen tak od stolu. Inovace máme i v názvu. Historie společnosti Siemens spolu s umem a zkušenostmi jejích pracovníků poskytují k dalšímu vývoji pevný základ.

Dnes měníme definici spolehlivého výkonu – od standardních produktů k elektromotorům a generátorům nejvyšší účinnosti; od jednoduchého „zapnuto/vypnuto“ po vše chytré mezi tím.


Volné pozice


Vyberte lokalitu, která vás zajímá.

Dělnické pozice

V Innomotics víme, že svět nezměníte sezením na židli. Inovace máme ve jméně. Neseme si s sebou dědictví společnosti Siemens s více než 150 lety inženýrských zkušeností. Dnes měníme definici spolehlivého výkonu - od standardních produktů k elektromotorům nejvyšší účinnosti; od jednoduchého zapnuto / vypnuto, po vše chytré mezi tím. Náš nejvýkonnější motor? 15 000 expertů, kolegyň a kolegů, kteří s námi otáčejí světem. Přidáte se?

Budete se věnovat především:

  • Obsluha a seřízení CNC strojů
  • Samokontrola vyrobených dílů
  • Transport materiálu
  • Práce s počítačem
  • Práce s výkresovou dokumentací

Můžete se těšit zejména na:

  • Přátelský kolektiv a podporu v začátcích
  • Využití Vašich profesních schopností v dlouhodobé perspektivě
  • Příležitost vhodnou i pro čerstvé absolventy

Další benefity:

  • Práce na hlavní pracovní poměr (37,5 hodin týdně)
  • Platové ohodnocení ve vyšších tarifních třídách
  • Štědré zaměstnanecké výhody (5 týdnů dovolené, roční příspěvek v rámci nabídky Benefit Plus, příspěvek na stravování, odměny při životním a pracovním jubileu, MultiSport karta a mnohé další)
  • Nástup ihned dle dohody

Měl/a byste mít:

  • Vzdělání v oboru a/nebo praxi s obráběním či seřizováním výrobních strojů
  • Znalost výkresové dokumentace a měření
  • Ochotu učit se a spolupracovat
  • Flexibilitu
  • Ochotu pracovat v třísměnném provozu
  • Znalost práce na PC
  • Znalost programovacího jazyka SINUMERIK výhodou

My jsme tým finální výroby a hledáme nové kolegy na pozici lakýrníka. Naší prací je zkompletovat námi vyráběné elektrické stroje (motory a generátory) před předáním zákazníkovi.

Budete se věnovat především:

  • lakování dílců a kompletních elektrických strojů točivých o hmotnosti 5 - 50 tun
  • další práce dle pokynů mistra.

Můžete se těšit zejména na:

  • sílu a stabilní zázemí společnosti Innomotics, smlouvu do kmenového stavu na dobu určitou 1 rok s možností prodloužení na dobu neurčitou
  • čisté, klimatizované a bezpečné pracoviště uvnitř moderního závodu

Další benefity:

  • 32 000 Kč ročně na volnočasové aktivity (Benefit plus)/ finanční benefity
  • 5 týdnů dovolené a možnost až 5 dní dovolené navíc
  • další dny volna navíc (svatba, stěhování,...)
  • 8hodinové směny
  • závodní stravování za zvýhodněnou cenu a novou jídelnu uvnitř závodu vč. salátového a teplého bufetu
  • odměnu za doporučení nového zaměstnance do výroby
  • firemní středisko na Vysočině (sleva na pobyt)
  • sportovní a kulturní akce
  • Multisport kartu
  • program slev a výhod

Měl/a byste mít:

  • časovou flexibilitu, spolehlivost, samostatnost
  • ochotu pracovat ve dvousměnném provozu
  • zkušenosti s lakováním výhodou
  • ochotu učit se novým věcem a přijmout odpovědnost za výsledky své práce
  • zájem o dlouhodobé stabilní zaměstnání
  • český jazyk na komunikativní úrovni (min. B2)

V Innomotics víme, že svět nezměníte sezením na židli. Inovace máme ve jméně. Neseme si s sebou dědictví společnosti Siemens s více než 150 lety inženýrských zkušeností. Dnes měníme definici spolehlivého výkonu - od standardních produktů k elektromotorům nejvyšší účinnosti; od jednoduchého zapnuto / vypnuto, po vše chytré mezi tím. Náš nejvýkonnější motor? 15 000 expertů, kolegyň a kolegů, kteří s námi otáčejí světem. Přidáte se?

Budete se věnovat především:

  • Lakování elektromotorů
  • Příprava barev
  • Dalším činnostem dle pokynů mistra

Můžete se těšit zejména na:

  • Přátelský kolektiv a podporu v začátcích
  • Využití Vašich profesních schopností v dlouhodobé perspektivě
  • Příležitost vhodnou i pro čerstvé absolventy

Další benefity:

  • Práce na hlavní pracovní poměr (37,5 hodin týdně)
  • Štědré zaměstnanecké výhody (5 týdnů dovolené, roční příspěvek v rámci nabídky Benefit Plus, příspěvek na stravování, odměny při životním a pracovním jubileu, MultiSport karta a mnohé další)
  • Nástup ihned dle dohody

Měl/a byste mít:

  • Manuální zručnost, pečlivost
  • Ochotu učit se a spolupracovat
  • Flexibilitu
  • Ochotu pracovat v třísměnném provozu
  • SŠ technického zaměření a praxe ve výrobní společnosti výhodou

V Innomotics víme, že svět nezměníte sezením na židli. Inovace máme ve jméně. Neseme si s sebou dědictví společnosti Siemens s více než 150 lety inženýrských zkušeností. Dnes měníme definici spolehlivého výkonu - od standardních produktů k elektromotorům nejvyšší účinnosti; od jednoduchého zapnuto / vypnuto, po vše chytré mezi tím. Náš nejvýkonnější motor? 15 000 expertů, kolegyň a kolegů, kteří s námi otáčejí světem. Přidáte se?

Budete se věnovat především:

  • Montáži elektromotorů
  • Práci se systémem PAP
  • Dalším činnostem dle pokynů mistra

Můžete se těšit zejména na:

  • Přátelský kolektiv a podporu v začátcích
  • Využití Vašich profesních schopností v dlouhodobé perspektivě
  • Příležitost vhodnou i pro čerstvé absolventy

Další benefity:

  • Práce na hlavní pracovní poměr (37,5 hodin týdně)
  • Štědré zaměstnanecké výhody (5 týdnů dovolené, roční příspěvek v rámci nabídky Benefit Plus, příspěvek na stravování, odměny při životním a pracovním jubileu, MultiSportkarta a mnohé další)
  • Nástup ihned dle dohody

Měl/a byste mít:

  • Manuální zručnost, pečlivost
  • Ochotu učit se a spolupracovat
  • Flexibilitu
  • Ochotu pracovat v třísměnném provozu
  • SŠ technického zaměření a praxe ve výrobní společnosti výhodou

Jsme tým obrobny. Naším úkolem je výroba komponentů pro rotory vysokovýkonných generátorů a elektromotorů. Naše unikátní výrobky přizpůsobujeme zákazníkům dle přání a žádné dva nejsou stejné. Naším úkolem je dodávat díly pro další části výroby ve stanovených termínech a dbát na vysokou kvalitu našich výrobků.

Budete se věnovat především:

  • obsluze CNC soustruhu pro výrobu hřídelí a rotorů
  • další práci na obrobně dle pokynů mistra
  • práci s jeřábem

Můžete se těšit zejména na:

  • sílu a stabilní zázemí společnosti Innomotics
  • smlouvu do kmenového stavu na dobu určitou 1 rok s možností prodloužení na dobu neurčitou
  • čisté, klimatizované a bezpečné pracoviště uvnitř moderního závodu
  • fajn tým, který drží při sobě a vzájemně se podporuje.

Další benefity:

  • 32 000 Kč ročně na volnočasové aktivity (Benefit plus)/ finanční benefity
  • 5 týdnů dovolené a možnost až 5 dní volna navíc
  • další dny volna navíc (svatba, stěhování,...)
  • 8hodinové směny
  • závodní stravování za zvýhodněnou cenu a novou jídelnu uvnitř závodu vč. salátového a teplého bufetu
  • odměnu za doporučení nového zaměstnance do výroby
  • firemní středisko na Vysočině (sleva na pobyt)
  • sportovní a kulturní akce
  • Multisport kartu
  • program slev a výhod

Měl/a byste mít:

  • chuť učit se nové věci
  • SŠ vzdělání/vyučení v oboru
  • praxe na CNC řízených strojích výhodou
  • ochota pracovat ve 2směnném provozu

Jsme tým navijárny firmy Innomotics v Drásově. Naše firma vyrábí velké elektromotory a generátory na míru zákazníkům z celého světa. V navijárně je převážná část výroby založena na odborné manuální práci. Naším úkolem je vyrábět cívky vodičů a ty následně vkládat do statorových a rotorových svazků. K nám do týmu proto hledáme šikovného a manuálně zručného kolegy, který má chuť a potenciál se vkládání cívek naučit.

Budete se věnovat především:

  • výroba a pájení cívek různých velikostí
  • vkládání, vtahování a zapojování vinutí
  • v prvních měsících zaškolení od zkušeného kolegy

Můžete se těšit zejména na:

  • sílu a stabilní zázemí společnosti Innomotics
  • smlouvu do kmenového stavu na dobu určitou 1 rok s možností prodloužení na dobu neurčitou
  • čisté, klimatizované a bezpečné pracoviště uvnitř moderního závodu

Další benefity:

  • 32 000 Kč ročně na volnočasové aktivity (Benefit plus)/ finanční benefity
  • 5 týdnů dovolené a možnost až 5 dní dovolené navíc
  • další dny volna navíc (svatba, stěhování,...)
  • 8hodinové směny
  • závodní stravování za zvýhodněnou cenu a novou jídelnu uvnitř závodu vč. salátového a teplého bufetu
  • odměnu za doporučení nového zaměstnance do výroby
  • firemní středisko na Vysočině (sleva na pobyt)
  • sportovní a kulturní akce
  • Multisport kartu
  • program slev a výhod

Měl/a byste mít:

  • chuť učit se nové věci
  • manuální zručnost
  • zájem o dlouhodobé zaměstnání
  • vzdělání ani zkušenosti nejsou potřeba, rádi Vás zaučíme.

Technické pozice

Do you have practical experience in Treasury in an international company? Are you proactive, results-oriented and able to work under pressure in a changing environment? Then we're looking for you!

Your future responsibilities:

  • Embedded into a team of treasury experts in Europe & Africa (EA) region you will manage bank accounts, payment infrastructure and liquidity planning for several countries in EA region.
  • You will ensure proper implementation of all corporate guidelines, processes and rules for assigned countries in EA region in line with the global strategy for treasury, finance, insurances and benefits.
  • You will be responsible for cash management for assigned Innomotics entities (Inquires related to payment transactions, bank account administration, bank connectivity, short-term liquidity forecasting, managing bank relationships etc.).
  • Coordinating guarantee management.
  • Coordinating shareholder controlling activities.
  • Managing FX and interest rate risks.
  • Coordinating actuary and insurance broker services for assigned entities.

What you can look forward to:

  • Flexibility: trustful environment with an inclusive and flexible way of working driven by results; hybrid and remote working enabled by innovative tools and devices, personal computer and smartphone.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Responsibility and the opportunity to influence and change.
  • Daily use of the English language.
  • Never stop growing: plenty opportunities for continuous and individual learning journeys.
  • An inclusive team culture where you can be yourself.

Your profile:

  • You have a university degree in Economics, Business Administration, Finance, Banking (or comparable knowledge).
  • In addition, several years of working experience in Treasury ideally in a medium size, international company.
  • Methodological, high analytical competence, focus on results, a confident manner and assertiveness.
  • Business fluent English skills round your profile.

Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • You will be responsible for the worldwide data provision and maintenance of product data for the operational business of our motor business in our SAP tool landscape.
  • Prepare and model product data to enable our product configuration tools and to ensure high data quality in our sales tools.
  • You will work closely with the product management in our global factory network and map product master data consistently in the IT tools with regards to milestones, delivery information and product costs.
  • To ensure data consistency, you will carry out analyses and evaluations, identify gaps and drive process improvements and optimizations.
  • You will be open for special projects to ensure an appropriate further enhancement of our tools and processes
  • You can count on team spirit and support of your global team in Germany, Czech Republic, USA and China

What you can look forward to:

  • Being part of highly motivated and friendly team.
  • Working for a market of low voltage motors, with focus on automation and digitalization in the process and manufacturing industries
  • 5 weeks holiday.
  • Flexible working hours with the possibility of remote work.
  • Annual bonus.
  • Meal e-vouchers.
  • Broad range of wellbeing benefits - annual cafeteria budget of 32000 CZK a year with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers.

Your profile:

  • University degree in IT studies or engineering studies or related major.
  • Based on this, you have relevant experience in material master data maintenance.
  • Ideally, you have already knowledge about product master data maintenance in the SAP environment and are familiar with variant configurations in SAP S/4.
  • Your customer-oriented thinking allows you to influence improvements and design of your area of responsibility.
  • Through your own initiative, solution-oriented and pragmatic approach, you will advance your tasks and shape the future of your area of responsibility.
  • You have good communication skills, the ability to work in a global team and intercultural competence in working with internal and external partners at all levels.
  • Language: English professional level (written & verbal), German is a plus.

Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • You will be responsible for the worldwide data provision and maintenance of product data for the operational business of our motor business in our SAP tool landscape.
  • Prepare and model product data to enable our product configuration tools and to ensure high data quality in our sales tools.
  • You will work closely with the product management in our global factory network and map product master data consistently in the IT tools with regards to milestones, delivery information and product costs.
  • To ensure data consistency, you will carry out analyses and evaluations, identify gaps and drive process improvements and optimizations.
  • You will be open for special projects to ensure an appropriate further enhancement of our tools and processes
  • You can count on team spirit and support of your global team in Germany, Czech Republic, USA and China

What you can look forward to:

  • Being part of highly motivated and friendly team.
  • Working for a market of low voltage motors, with focus on automation and digitalization in the process and manufacturing industries
  • 5 weeks holiday.
  • Flexible working hours with the possibility of remote work.
  • Annual bonus.
  • Meal e-vouchers.
  • Broad range of wellbeing benefits - annual cafeteria budget of 32000 CZK a year with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers.

Your profile:

  • University degree in IT studies or engineering studies or related major.
  • Based on this, you have relevant experience in material master data maintenance.
  • Ideally, you have already knowledge about product master data maintenance in the SAP environment and are familiar with variant configurations in SAP S/4.
  • Your customer-oriented thinking allows you to influence improvements and design of your area of responsibility.
  • Through your own initiative, solution-oriented and pragmatic approach, you will advance your tasks and shape the future of your area of responsibility.
  • You have good communication skills, the ability to work in a global team and intercultural competence in working with internal and external partners at all levels.
  • Language: English professional level (written & verbal), German is a plus.

Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • You will be responsible for the worldwide data provision and maintenance of product data for the operational business of our motor business in our SAP tool landscape.
  • Prepare and model product data to enable our product configuration tools and to ensure high data quality in our sales tools.
  • You will work closely with the product management in our global factory network and map product master data consistently in the IT tools with regards to milestones, delivery information and product costs.
  • To ensure data consistency, you will carry out analyses and evaluations, identify gaps and drive process improvements and optimizations.
  • You will be open for special projects to ensure an appropriate further enhancement of our tools and processes
  • You can count on team spirit and support of your global team in Germany, Czech Republic, USA and China

What you can look forward to:

  • Being part of highly motivated and friendly team.
  • Working for a market of low voltage motors, with focus on automation and digitalization in the process and manufacturing industries
  • 5 weeks holiday.
  • Flexible working hours with the possibility of remote work.
  • Annual bonus.
  • Meal e-vouchers.
  • Broad range of wellbeing benefits - annual cafeteria budget of 32000 CZK a year with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers.

Your profile:

  • University degree in IT studies or engineering studies or related major.
  • Based on this, you have relevant experience in material master data maintenance.
  • Ideally, you have already knowledge about product master data maintenance in the SAP environment and are familiar with variant configurations in SAP S/4.
  • Your customer-oriented thinking allows you to influence improvements and design of your area of responsibility.
  • Through your own initiative, solution-oriented and pragmatic approach, you will advance your tasks and shape the future of your area of responsibility.
  • You have good communication skills, the ability to work in a global team and intercultural competence in working with internal and external partners at all levels.
  • Language: English professional level (written & verbal), German is a plus.

Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • You will be responsible for the worldwide data provision and maintenance of product data for the operational business of our motor business in our SAP tool landscape.
  • Prepare and model product data to enable our product configuration tools and to ensure high data quality in our sales tools.
  • You will work closely with the product management in our global factory network and map product master data consistently in the IT tools with regards to milestones, delivery information and product costs.
  • To ensure data consistency, you will carry out analyses and evaluations, identify gaps and drive process improvements and optimizations.
  • You will be open for special projects to ensure an appropriate further enhancement of our tools and processes
  • You can count on team spirit and support of your global team in Germany, Czech Republic, USA and China

What you can look forward to:

  • Being part of highly motivated and friendly team.
  • Working for a market of low voltage motors, with focus on automation and digitalization in the process and manufacturing industries
  • 5 weeks holiday.
  • Flexible working hours with the possibility of remote work.
  • Annual bonus.
  • Meal e-vouchers.
  • Broad range of wellbeing benefits - annual cafeteria budget of 32000 CZK a year with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers.

Your profile:

  • University degree in IT studies or engineering studies or related major.
  • Based on this, you have relevant experience in material master data maintenance.
  • Ideally, you have already knowledge about product master data maintenance in the SAP environment and are familiar with variant configurations in SAP S/4.
  • Your customer-oriented thinking allows you to influence improvements and design of your area of responsibility.
  • Through your own initiative, solution-oriented and pragmatic approach, you will advance your tasks and shape the future of your area of responsibility.
  • You have good communication skills, the ability to work in a global team and intercultural competence in working with internal and external partners at all levels.
  • Language: English professional level (written & verbal), German is a plus.

Na oddělení zákaznického servisu nyní hledáme nového kolegu/kolegyni na pozici Ekonom/logistik servisu.

Budete se věnovat především:

  • vyhodnocování finančních a nefinančních KPI
  • údržbě komerčních dat a cenotvorbě
  • analýze a controllingu prodeje a nákladů
  • fakturaci a další administrativní činnosti

Další benefity:

  • 5 týdnů dovolené
  • flexibilní pracovní doba
  • roční příspěvek do cafeterie do programu Benefit plus
  • příspěvek na stravování
  • home office
  • Multisport karta
  • dobrovolnický den, společenské a kulturní akce
  • místo výkonu práce: Frenštát

Měl/a byste mít:

  • min SŠ vzdělání ekonomického směru
  • komunikativní znalost AJ nebo NJ
  • dobré komunikační a prezentační schopnosti
  • znalost MS Office
  • orientaci na zákazníka a výsledek
  • schopnost stále se učit novým věcem
  • rozhodnost a důslednost
  • analytické myšlení

We are the electrical design team as part of the global engineering at Innomotics/Siemens. Our company develops and manufactures high power electric motors and generators (up to 25 MW/MVA) tailored for customers all over the world. We work on orders of motors from Drasov, Nuremberg (Germany) and Norwood (USA). Become a member of our team!

Your future responsibilities:

  • electromagnetic design of rotating machines according to specific customer requirements.
  • preparation of documents and creation of feasibility studies, creation of Bills of Material.
  • creation of customer-specific documentation.
  • support of manufacturing departments, and coordination of projects to implement product enhancements.
  • assists in routine material specification, schematic preparation and appropriate follow-up.
  • assists in communicating routine technical and commercial issues clearly.
  • risk assessment and design of mitigation measures.
  • communication with customers in the context of machine design modifications

What you can look forward to:

  • a unique product - motors that are used, for example, on oil rigs or on the largest transport ships in the world
  • extensive training in the electric design tools used
  • room for innovation and creativity
  • opportunities for international work trips or other international cooperation
  • the opportunity to profile yourself in the field of new machine development
  • work in a cross-location and international team (Germany/USA)

Extra benefits:

  • 5 weeks of vacation
  • office in Drásov - near Brno
  • CZK 1400,- monthly employer's contribution to pension/life insurance
  • company meals at a discounted price
  • flexible working hours with a fixed core
  • CZK 15000,- per year for health and leisure activities (Benefit plus)
  • employee share matching program
  • Employee discount program (O2, T-mobile, Opel, KFC,...)
  • company language training

Your profile:

  • university of Electrical Engineering (minimum of a Bachelor’s degree in Electrical Engineering required or advanced degree, where required, or equivalent combination of education and experience)
  • basic: CZ, very good English language skills are required, German language is an advantage
  • experience in the design/construction of electrical rotating machines
  • basic knowledge of VFD applications, insulation design, power systems design, air flow and heat transfer preferred.
  • basis willingness to travel (parts of the training take place in USA)
  • knowledge of SAP (preferably)
  • orientation in technical documentation (foreign language)
  • creative and innovative thinking
  • diligence, independence, reliability, communicative, willingness to learn new things

We are the electrical design team as part of the global engineering at Innomotics/Siemens. Our company develops and manufactures high power electric motors and generators (up to 25 MW/MVA) tailored for customers all over the world. We work on orders of motors from Drasov, Nuremberg (Germany) and Norwood (USA). Become a member of our team!

Your future responsibilities:

  • Electromagnetic design of rotating machines according to specific customer requirements.
  • Preparation of documents and creation of feasibility studies, creation of Bills of Material.
  • Creation of customer-specific documentation.
  • Support of manufacturing departments, and coordination of projects to implement product enhancements.
  • Assists in routine material specification, schematic preparation and appropriate follow-up.
  • Assists in communicating routine technical and commercial issues clearly.
  • Risk assessment and design of mitigation measures.
  • Communication with customers in the context of machine design modifications.

What you can look forward to:

  • A unique product - motors that are used, for example, on oil rigs or on the largest transport ships in the world.
  • Extensive training in the electric design tools used.
  • Room for innovation and creativity.
  • Opportunities for international work trips or other international cooperation.
  • The opportunity to profile yourself in the field of new machine development.
  • Work in a cross-location and international team (Germany/USA).

Extra benefits:

  • 5 weeks of vacation.
  • Office in Drásov - near Brno.
  • CZK 1400,- monthly employer's contribution to pension/life insurance.
  • Company meals at a discounted price.
  • Flexible working hours with a fixed core.
  • CZK 15000,- per year for health and leisure activities (Benefit plus).
  • Employee discount program (O2, T-mobile, Opel, KFC,...).
  • Company language training.

Your profile:

  • University of Electrical Engineering (minimum of a Bachelor’s degree in Electrical Engineering required or advanced degree, where required, or equivalent combination of education and experience).
  • Basic: CZ, very good English language skills are required, German language is an advantage.
  • Experience in the design/construction of electrical rotating machines.
  • Basic knowledge of VFD applications, insulation design, power systems design, air flow and heat transfer preferred.
  • Basis willingness to travel (parts of the training take place in USA).
  • Knowledge of SAP (preferably).
  • Orientation in technical documentation (foreign language).
  • Creative and innovative thinking.
  • Diligence, independence, reliability, communicative, willingness to learn new things.

Do you speak excellent English, have customs and export control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • You are the responsible Export Control contact for all plants and locations within the assigned countries for Innomotics.
  • You support the local export control contacts in the assigned countries in the communication with authorities, audits or checks through the authorities.
  • You evaluate, establish and/or manage Export Control third party providers if applicable or provide guidance on the selection and management of third-party providers in the assigned countries (e.g. external consultants).
  • You act as functional support in process designing, you support in the evaluation and solving of difficult export processes and in the implementation of ECC procedures and processes.
  • You are business consultant and advisor and act as approval responsible (case release) in the case of involvement of listed partners, countries of concern or specific controlled items.
  • You act as deputy to the HUB Customs Expert in all Customs related matters in close contact and collaboration with ECC representatives of the assigned countries.
  • You verify and approve contracts together with the Legal &
  • Compliance function with regard to ECC topics.
  • You establish, support, and have regular communication with ECC representatives of the assigned countries.
  • You implement, enforce and control all requirements of the global ICP as well as local requirements based on national legislation.
  • You support and contribute in ICP design if there are additional ECC specific topics that need to be covered in the area of responsibility.
  • You analyze import and export regulatory changes for impacts and ensure relevant functional training for all impacted employees.
  • You act as responsible contact for the HUB in the evaluation, implementation, and management of a Global Trade Management Tool.
  • You develop standard of care for the assignment of trade data elements (harmonized tariff code, export control classification number, country of origin and preference).
  • You support in ERP testing when new IT processes with ECC relevance are rolled out.
  • You provide transactional import or export and classification support as needed.

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control and Customs
  • Experience in dealing with Export Control regimes of different countries, like EU dualuse regulation and especially US export control rules and regulations.
  • Willingness to enlarge your skills and knowledge with Customs topics to be able to act as deputy in the area of Customs
  • Experience in working in a multi-cultural corporate business setting
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Advanced knowledge of MS Office
  • Advanced knowledge of English (C1), any additional language is an advantage
  • SAP knowledge is an advantage
  • Reliability, thoroughness
  • Active approach to work
  • Willingness to travel (10%-20%)
  • Work in a fast-paced environment
  • Work with minimal guidance or direction
  • Detail oriented
  • Identify and implement process improvement opportunities
  • Effectively communicate and manage change
  • Review / comprehend technical specifications, drawings, or other product information
  • Perform research (online or otherwise) to obtain necessary product details for classification purposes

Do you speak excellent English, have customs and export control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • You are the responsible Export Control contact for all plants and locations within the assigned countries for Innomotics.
  • You support the local export control contacts in the assigned countries in the communication with authorities, audits or checks through the authorities.
  • You evaluate, establish and/or manage Export Control third party providers if applicable or provide guidance on the selection and management of third-party providers in the assigned countries (e.g. external consultants).
  • You act as functional support in process designing, you support in the evaluation and solving of difficult export processes and in the implementation of ECC procedures and processes.
  • You are business consultant and advisor and act as approval responsible (case release) in the case of involvement of listed partners, countries of concern or specific controlled items.
  • You act as deputy to the HUB Customs Expert in all Customs related matters in close contact and collaboration with ECC representatives of the assigned countries.
  • You verify and approve contracts together with the Legal &
  • Compliance function with regard to ECC topics.
  • You establish, support, and have regular communication with ECC representatives of the assigned countries.
  • You implement, enforce and control all requirements of the global ICP as well as local requirements based on national legislation.
  • You support and contribute in ICP design if there are additional ECC specific topics that need to be covered in the area of responsibility.
  • You analyze import and export regulatory changes for impacts and ensure relevant functional training for all impacted employees.
  • You act as responsible contact for the HUB in the evaluation, implementation, and management of a Global Trade Management Tool.
  • You develop standard of care for the assignment of trade data elements (harmonized tariff code, export control classification number, country of origin and preference).
  • You support in ERP testing when new IT processes with ECC relevance are rolled out.
  • You provide transactional import or export and classification support as needed.

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control and Customs
  • Experience in dealing with Export Control regimes of different countries, like EU dualuse regulation and especially US export control rules and regulations.
  • Willingness to enlarge your skills and knowledge with Customs topics to be able to act as deputy in the area of Customs
  • Experience in working in a multi-cultural corporate business setting
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Advanced knowledge of MS Office
  • Advanced knowledge of English (C1), any additional language is an advantage
  • SAP knowledge is an advantage
  • Reliability, thoroughness
  • Active approach to work
  • Willingness to travel (10%-20%)
  • Work in a fast-paced environment
  • Work with minimal guidance or direction
  • Detail oriented
  • Identify and implement process improvement opportunities
  • Effectively communicate and manage change
  • Review / comprehend technical specifications, drawings, or other product information
  • Perform research (online or otherwise) to obtain necessary product details for classification purposes

Do you speak excellent English, have customs and export control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • You are the responsible Export Control contact for all plants and locations within the assigned countries for Innomotics.
  • You support the local export control contacts in the assigned countries in the communication with authorities, audits or checks through the authorities.
  • You evaluate, establish and/or manage Export Control third party providers if applicable or provide guidance on the selection and management of third-party providers in the assigned countries (e.g. external consultants).
  • You act as functional support in process designing, you support in the evaluation and solving of difficult export processes and in the implementation of ECC procedures and processes.
  • You are business consultant and advisor and act as approval responsible (case release) in the case of involvement of listed partners, countries of concern or specific controlled items.
  • You act as deputy to the HUB Customs Expert in all Customs related matters in close contact and collaboration with ECC representatives of the assigned countries.
  • You verify and approve contracts together with the Legal &
  • Compliance function with regard to ECC topics.
  • You establish, support, and have regular communication with ECC representatives of the assigned countries.
  • You implement, enforce and control all requirements of the global ICP as well as local requirements based on national legislation.
  • You support and contribute in ICP design if there are additional ECC specific topics that need to be covered in the area of responsibility.
  • You analyze import and export regulatory changes for impacts and ensure relevant functional training for all impacted employees.
  • You act as responsible contact for the HUB in the evaluation, implementation, and management of a Global Trade Management Tool.
  • You develop standard of care for the assignment of trade data elements (harmonized tariff code, export control classification number, country of origin and preference).
  • You support in ERP testing when new IT processes with ECC relevance are rolled out.
  • You provide transactional import or export and classification support as needed.

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control and Customs
  • Experience in dealing with Export Control regimes of different countries, like EU dualuse regulation and especially US export control rules and regulations.
  • Willingness to enlarge your skills and knowledge with Customs topics to be able to act as deputy in the area of Customs
  • Experience in working in a multi-cultural corporate business setting
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Advanced knowledge of MS Office
  • Advanced knowledge of English (C1), any additional language is an advantage
  • SAP knowledge is an advantage
  • Reliability, thoroughness
  • Active approach to work
  • Willingness to travel (10%-20%)
  • Work in a fast-paced environment
  • Work with minimal guidance or direction
  • Detail oriented
  • Identify and implement process improvement opportunities
  • Effectively communicate and manage change
  • Review / comprehend technical specifications, drawings, or other product information
  • Perform research (online or otherwise) to obtain necessary product details for classification purposes

Do you speak excellent English, have customs and export control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • You are the responsible Export Control contact for all plants and locations within the assigned countries for Innomotics.
  • You support the local export control contacts in the assigned countries in the communication with authorities, audits or checks through the authorities.
  • You evaluate, establish and/or manage Export Control third party providers if applicable or provide guidance on the selection and management of third-party providers in the assigned countries (e.g. external consultants).
  • You act as functional support in process designing, you support in the evaluation and solving of difficult export processes and in the implementation of ECC procedures and processes.
  • You are business consultant and advisor and act as approval responsible (case release) in the case of involvement of listed partners, countries of concern or specific controlled items.
  • You act as deputy to the HUB Customs Expert in all Customs related matters in close contact and collaboration with ECC representatives of the assigned countries.
  • You verify and approve contracts together with the Legal &
  • Compliance function with regard to ECC topics.
  • You establish, support, and have regular communication with ECC representatives of the assigned countries.
  • You implement, enforce and control all requirements of the global ICP as well as local requirements based on national legislation.
  • You support and contribute in ICP design if there are additional ECC specific topics that need to be covered in the area of responsibility.
  • You analyze import and export regulatory changes for impacts and ensure relevant functional training for all impacted employees.
  • You act as responsible contact for the HUB in the evaluation, implementation, and management of a Global Trade Management Tool.
  • You develop standard of care for the assignment of trade data elements (harmonized tariff code, export control classification number, country of origin and preference).
  • You support in ERP testing when new IT processes with ECC relevance are rolled out.
  • You provide transactional import or export and classification support as needed.

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control and Customs
  • Experience in dealing with Export Control regimes of different countries, like EU dualuse regulation and especially US export control rules and regulations.
  • Willingness to enlarge your skills and knowledge with Customs topics to be able to act as deputy in the area of Customs
  • Experience in working in a multi-cultural corporate business setting
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Advanced knowledge of MS Office
  • Advanced knowledge of English (C1), any additional language is an advantage
  • SAP knowledge is an advantage
  • Reliability, thoroughness
  • Active approach to work
  • Willingness to travel (10%-20%)
  • Work in a fast-paced environment
  • Work with minimal guidance or direction
  • Detail oriented
  • Identify and implement process improvement opportunities
  • Effectively communicate and manage change
  • Review / comprehend technical specifications, drawings, or other product information
  • Perform research (online or otherwise) to obtain necessary product details for classification purposes

Do you speak excellent English, have Export Control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • Support the Innomotics export control and customs responsible (ECC) in the Czech Republic as part of the HUB DE/CZ
  • Handle matters relating to goods and order specific export controls, sanctions, and embargo regulations under CZ, EU, and US law
  • Assist the ECC Team in controlling and developing internal ECC processes according to legal requirements and policies
  • Develop, implement, and enforce the Internal Control Program (ICP) for export control
  • Evaluate contract clauses and critical export transactions, as well as contract and delivery releases
  • Support the application of export licenses and the preparation of reports
  • Ensure compliance with regulatory requirements through organizational measures and proper export customs processes
  • Conduct regular spot checks and cooperate during official external and internal audits
  • Cooperate in the preparation, development, and implementation of global trainings, workshops, reviews, and presentations
  • Analyze legal/export control and customs-related requirements and develop specialist concepts for their integration into IT/ERP systems
  • Support the local SAP RLP Team with the maintenance of export control-specific settings in the SAP System
  • Analyze goods (hardware, software, technology) according to technical characteristics and determine goods-specific export data based on legal requirements (EU regulation, Union Customs Code, etc.)
  • Review and resolve export control escalations
  • Engage in cross-border activities and cooperate with the Innomotics ECC community worldwide

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control
  • Experience in working in a multi-cultural corporate business setting
  • Advanced knowledge of English (C1)
  • Advanced knowledge of MS Office
  • SAP is an advantage
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Willingness to travel (10%-20%)
  • Reliability, thoroughness and independence, detail oriented
  • Active approach to work

Do you speak excellent English, have Export Control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • Support the Innomotics export control and customs responsible (ECC) in the Czech Republic as part of the HUB DE/CZ
  • Handle matters relating to goods and order specific export controls, sanctions, and embargo regulations under CZ, EU, and US law
  • Assist the ECC Team in controlling and developing internal ECC processes according to legal requirements and policies
  • Develop, implement, and enforce the Internal Control Program (ICP) for export control
  • Evaluate contract clauses and critical export transactions, as well as contract and delivery releases
  • Support the application of export licenses and the preparation of reports
  • Ensure compliance with regulatory requirements through organizational measures and proper export customs processes
  • Conduct regular spot checks and cooperate during official external and internal audits
  • Cooperate in the preparation, development, and implementation of global trainings, workshops, reviews, and presentations
  • Analyze legal/export control and customs-related requirements and develop specialist concepts for their integration into IT/ERP systems
  • Support the local SAP RLP Team with the maintenance of export control-specific settings in the SAP System
  • Analyze goods (hardware, software, technology) according to technical characteristics and determine goods-specific export data based on legal requirements (EU regulation, Union Customs Code, etc.)
  • Review and resolve export control escalations
  • Engage in cross-border activities and cooperate with the Innomotics ECC community worldwide

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control
  • Experience in working in a multi-cultural corporate business setting
  • Advanced knowledge of English (C1)
  • Advanced knowledge of MS Office
  • SAP is an advantage
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Willingness to travel (10%-20%)
  • Reliability, thoroughness and independence, detail oriented
  • Active approach to work

Do you speak excellent English, have Export Control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • Support the Innomotics export control and customs responsible (ECC) in the Czech Republic as part of the HUB DE/CZ
  • Handle matters relating to goods and order specific export controls, sanctions, and embargo regulations under CZ, EU, and US law
  • Assist the ECC Team in controlling and developing internal ECC processes according to legal requirements and policies
  • Develop, implement, and enforce the Internal Control Program (ICP) for export control
  • Evaluate contract clauses and critical export transactions, as well as contract and delivery releases
  • Support the application of export licenses and the preparation of reports
  • Ensure compliance with regulatory requirements through organizational measures and proper export customs processes
  • Conduct regular spot checks and cooperate during official external and internal audits
  • Cooperate in the preparation, development, and implementation of global trainings, workshops, reviews, and presentations
  • Analyze legal/export control and customs-related requirements and develop specialist concepts for their integration into IT/ERP systems
  • Support the local SAP RLP Team with the maintenance of export control-specific settings in the SAP System
  • Analyze goods (hardware, software, technology) according to technical characteristics and determine goods-specific export data based on legal requirements (EU regulation, Union Customs Code, etc.)
  • Review and resolve export control escalations
  • Engage in cross-border activities and cooperate with the Innomotics ECC community worldwide

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control
  • Experience in working in a multi-cultural corporate business setting
  • Advanced knowledge of English (C1)
  • Advanced knowledge of MS Office
  • SAP is an advantage
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Willingness to travel (10%-20%)
  • Reliability, thoroughness and independence, detail oriented
  • Active approach to work

Do you speak excellent English, have Export Control experience and excellent communication skills? Then we're looking for you. Take the opportunity to work in an international environment and join us!

Your future responsibilities:

  • Support the Innomotics export control and customs responsible (ECC) in the Czech Republic as part of the HUB DE/CZ
  • Handle matters relating to goods and order specific export controls, sanctions, and embargo regulations under CZ, EU, and US law
  • Assist the ECC Team in controlling and developing internal ECC processes according to legal requirements and policies
  • Develop, implement, and enforce the Internal Control Program (ICP) for export control
  • Evaluate contract clauses and critical export transactions, as well as contract and delivery releases
  • Support the application of export licenses and the preparation of reports
  • Ensure compliance with regulatory requirements through organizational measures and proper export customs processes
  • Conduct regular spot checks and cooperate during official external and internal audits
  • Cooperate in the preparation, development, and implementation of global trainings, workshops, reviews, and presentations
  • Analyze legal/export control and customs-related requirements and develop specialist concepts for their integration into IT/ERP systems
  • Support the local SAP RLP Team with the maintenance of export control-specific settings in the SAP System
  • Analyze goods (hardware, software, technology) according to technical characteristics and determine goods-specific export data based on legal requirements (EU regulation, Union Customs Code, etc.)
  • Review and resolve export control escalations
  • Engage in cross-border activities and cooperate with the Innomotics ECC community worldwide

What you can look forward to:

  • Long-term cooperation
  • Diverse work in an international environment
  • Responsibility and the opportunity to influence and change
  • Daily use of the English language
  • Motivational salary, company computer and phone
  • Working from home (with occasional travel to the office/factory)
  • Broad range of wellbeing offerings: 5 weeks holiday, e voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • Possible place of work: Mohelnice, Frenštát, Drásov, Praha, Brno

Your profile:

  • University degree (engineering, business administration) or equivalent
  • Previous experience roles associated with Export Control
  • Experience in working in a multi-cultural corporate business setting
  • Advanced knowledge of English (C1)
  • Advanced knowledge of MS Office
  • SAP is an advantage
  • Excellent interpersonal and communication skills, both verbally and in writing
  • Willingness to travel (10%-20%)
  • Reliability, thoroughness and independence, detail oriented
  • Active approach to work

We are looking for a Functional Controller Procurement (SCM Specialist) to join our team at Innomotics – A Siemens Business. Your change engine. Motors and drives are our business redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • Self dependent and reliable execution of the reporting/controlling function to provide a regular (management) information system and to establish data transparency within defined Locations.
  • Adherence to and deployment of superordinated requirements (guidelines, KPIs) and controlling tools to secure a consequent process compliance.
  • Development of complex and comprehensive (ad-hoc) analyses, concepts, presentations and other support to lay an objective and reliable foundation for management decisions.
  • Increase of transparency about Procurement activities and occurences within assigned area of responsibility to assist and support business challenges and processes on functional level. Compilation of analyses and derivation of proposals/hypotheses for improvement of material field strategies.
  • Optimization and efficiency enhancement of the controlling process under selection, development and implementation of appropriate controlling tools (following superordinated requirements) for the assigned area of responsibility. Leading/participating in workshops and projects to collect information and to further develop the controlling function.
  • Coordination and controlling of the budget planning for the assigned Locations in alignment with other relevant organizational units, cross-functions and superordinated units.
  • Ensure knowledge transfer (guidelines, tools, etc.) to the assigned Locations and interface partners through proactive communication and lead of / participation in workshops.
  • (Strategic) Projects - Responsible for interdisciplinary project work to optimize processes.
  • Concepts - Design future-oriented, innovative concepts and implement the concepts to secure the success of the organization with a systematic and strategic approach.
  • Standardization - Design and implement standardized methods, processes and systems to optimize processes and work results.

What you can look forward to:

  • Office in Drásov, Brno or Prague.
  • Opportunities for personal and professional growth.
  • Flexi-time working hours & remote work.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, corporate holiday resort in Vysočina)...

Your profile:

  • Master’s degree in Business Administration or Engineering.
  • At least 3-5 years of professional experience in procurement controlling and/or strategic procuremen.
  • Deep knowledge of SCM CoRE, Anaplan, PUMA is an advantage.
  • Knowledge of implementing digitalization solutions (e.g Dash Boards).
  • Analytic mindset with success-orientated and creative solution finding.
  • Fluent language skills in English / German is a plus.

We are looking for a Functional Controller Procurement (SCM Specialist) to join our team at Innomotics – A Siemens Business. Your change engine. Motors and drives are our business redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • Self dependent and reliable execution of the reporting/controlling function to provide a regular (management) information system and to establish data transparency within defined Locations.
  • Adherence to and deployment of superordinated requirements (guidelines, KPIs) and controlling tools to secure a consequent process compliance.
  • Development of complex and comprehensive (ad-hoc) analyses, concepts, presentations and other support to lay an objective and reliable foundation for management decisions.
  • Increase of transparency about Procurement activities and occurences within assigned area of responsibility to assist and support business challenges and processes on functional level. Compilation of analyses and derivation of proposals/hypotheses for improvement of material field strategies.
  • Optimization and efficiency enhancement of the controlling process under selection, development and implementation of appropriate controlling tools (following superordinated requirements) for the assigned area of responsibility. Leading/participating in workshops and projects to collect information and to further develop the controlling function.
  • Coordination and controlling of the budget planning for the assigned Locations in alignment with other relevant organizational units, cross-functions and superordinated units.
  • Ensure knowledge transfer (guidelines, tools, etc.) to the assigned Locations and interface partners through proactive communication and lead of / participation in workshops.
  • (Strategic) Projects - Responsible for interdisciplinary project work to optimize processes.
  • Concepts - Design future-oriented, innovative concepts and implement the concepts to secure the success of the organization with a systematic and strategic approach.
  • Standardization - Design and implement standardized methods, processes and systems to optimize processes and work results.

What you can look forward to:

  • Office in Drásov, Prague or Brno.
  • Opportunities for personal and professional growth.
  • Flexi-time working hours and possibility of home office.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, equity program, corporate holiday resort in Vysočina)...

Your profile:

  • Master’s degree in Business Administration or Engineering.
  • At least 3-5 years of professional experience in procurement controlling and/or strategic procuremen.
  • Deep knowledge of SCM CoRE, Anaplan, PUMA is an advantage.
  • Knowledge of implementing digitalization solutions (e.g Dash Boards).
  • Analytic mindset with success-orientated and creative solution finding.
  • Fluent language skills in English / German is a plus.

We are looking for a Functional Controller Procurement (SCM Specialist) to join our team at Innomotics – A Siemens Business. Your change engine. Motors and drives are our business redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • Self dependent and reliable execution of the reporting/controlling function to provide a regular (management) information system and to establish data transparency within defined Locations.
  • Adherence to and deployment of superordinated requirements (guidelines, KPIs) and controlling tools to secure a consequent process compliance.
  • Development of complex and comprehensive (ad-hoc) analyses, concepts, presentations and other support to lay an objective and reliable foundation for management decisions.
  • Increase of transparency about Procurement activities and occurences within assigned area of responsibility to assist and support business challenges and processes on functional level. Compilation of analyses and derivation of proposals/hypotheses for improvement of material field strategies.
  • Optimization and efficiency enhancement of the controlling process under selection, development and implementation of appropriate controlling tools (following superordinated requirements) for the assigned area of responsibility. Leading/participating in workshops and projects to collect information and to further develop the controlling function.
  • Coordination and controlling of the budget planning for the assigned Locations in alignment with other relevant organizational units, cross-functions and superordinated units.
  • Ensure knowledge transfer (guidelines, tools, etc.) to the assigned Locations and interface partners through proactive communication and lead of / participation in workshops.
  • (Strategic) Projects - Responsible for interdisciplinary project work to optimize processes.
  • Concepts - Design future-oriented, innovative concepts and implement the concepts to secure the success of the organization with a systematic and strategic approach.
  • Standardization - Design and implement standardized methods, processes and systems to optimize processes and work results.

What you can look forward to:

  • Office in Drásov, Brno or Prague.
  • Opportunities for personal and professional growth.
  • Flexi-time working hours & remote work.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, corporate holiday resort in Vysočina)...

Your profile:

  • Master’s degree in Business Administration or Engineering.
  • At least 3-5 years of professional experience in procurement controlling and/or strategic procuremen.
  • Deep knowledge of SCM CoRE, Anaplan, PUMA is an advantage.
  • Knowledge of implementing digitalization solutions (e.g Dash Boards).
  • Analytic mindset with success-orientated and creative solution finding.
  • Fluent language skills in English / German is a plus.

We are looking for a Functional Controller Procurement (SCM Specialist) to join our team at Innomotics – A Siemens Business. Your change engine. Motors and drives are our business redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go!

Your future responsibilities:

  • Self dependent and reliable execution of the reporting/controlling function to provide a regular (management) information system and to establish data transparency within defined Locations.
  • Adherence to and deployment of superordinated requirements (guidelines, KPIs) and controlling tools to secure a consequent process compliance.
  • Development of complex and comprehensive (ad-hoc) analyses, concepts, presentations and other support to lay an objective and reliable foundation for management decisions.
  • Increase of transparency about Procurement activities and occurences within assigned area of responsibility to assist and support business challenges and processes on functional level. Compilation of analyses and derivation of proposals/hypotheses for improvement of material field strategies.
  • Optimization and efficiency enhancement of the controlling process under selection, development and implementation of appropriate controlling tools (following superordinated requirements) for the assigned area of responsibility. Leading/participating in workshops and projects to collect information and to further develop the controlling function.
  • Coordination and controlling of the budget planning for the assigned Locations in alignment with other relevant organizational units, cross-functions and superordinated units.
  • Ensure knowledge transfer (guidelines, tools, etc.) to the assigned Locations and interface partners through proactive communication and lead of / participation in workshops.
  • (Strategic) Projects - Responsible for interdisciplinary project work to optimize processes.
  • Concepts - Design future-oriented, innovative concepts and implement the concepts to secure the success of the organization with a systematic and strategic approach.
  • Standardization - Design and implement standardized methods, processes and systems to optimize processes and work results.

What you can look forward to:

  • Office in Drásov, Prague or Brno.
  • Opportunities for personal and professional growth.
  • Flexi-time working hours and possibility of home office.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, equity program, corporate holiday resort in Vysočina)...

Your profile:

  • Master’s degree in Business Administration or Engineering.
  • At least 3-5 years of professional experience in procurement controlling and/or strategic procuremen.
  • Deep knowledge of SCM CoRE, Anaplan, PUMA is an advantage.
  • Knowledge of implementing digitalization solutions (e.g Dash Boards).
  • Analytic mindset with success-orientated and creative solution finding.
  • Fluent language skills in English / German is a plus.

Can you help us drive our vision for the future? Do you like supplier management? Thenwe are looking for you! Become part of the manufacturing plants in Mohelnice and Frenštát p. Radhoštěm! The Head of Strategic Procurement for two production plants of low voltage motors located in Mohelnice and Frenštát p. Radhoštěm is a leadership role responsible for overseeing and executing procurement strategies aligned with organizational objectives. This role involves leading a team of procurement professionals, establishing vendor relationships, negotiating contracts, and optimizing procurement processes to ensure efficiency and cost-effectiveness. The Head of Strategic Procurement plays a pivotal role in driving strategic decision-making related to sourcing, purchasing, and supplier management to support the organization's overall growth and success.

Your future responsibilities:

  • Collaborate with factory and global management to develop long-term procurement strategies and initiatives.
  • Formulate and implement global procurement strategies in line with organizational goals and objectives.
  • Identify opportunities for cost savings, process improvement, and risk mitigation within the procurement function.
  • Build and maintain strong relationships with key suppliers and vendors.
  • Negotiate contracts, terms, and pricing agreements to optimize value and mitigate risks.
  • Monitor supplier performance and address any issues or concerns in a timely manner.
  • Develop and manage of the procurement budget.
  • Monitor procurement expenditures and identify opportunities for cost reduction and savings.
  • Cooperation in auditing and resolving supplier ratings (quality assessment).
  • Ensure compliance with relevant regulations and internal policies throughout the procurement process.
  • Lead and mentor a team of procurement professionals, fostering a collaborative and high-performance work environment.

What you can look forward to:

  • Opportunities for professional development and career advancement.
  • Dynamic and collaborative work environment.
  • Exciting projects, cooperation with leading specialists.
  • Friendly staff enthusiastic about electric motors.

Extra benefits:

  • 25 leave days and a variety of flexible working models that allow time off for yourself.
  • Various discounts and offers.
  • Competitive salary and business car.
  • Annual bonus.
  • Home office 2 days per week.
  • E-voucher card - for meal vouchers.
  • Broad range of wellbeing offerings - annual cafeteria „Benefit Plus“ budget with any use on the benefit-plus website (e.g. language course, cultural and sporting events, cinema etc.), MultiSport card, various discounts and offers.

Your profile:

  • Proven track record in strategic procurement, sourcing and supplier management preferably in manufacturing organization demonstrated with leadership capabilities (at least 5 years).
  • Strong negotiation skills and ability to manage complex vendor relationships.
  • Fluency in English is a necessary.
  • The ability to use the Czech language is a great advantage .
  • Effective communication and interpersonal skills, with the ability to collaborate cross-functionally and influence stakeholders at all levels of the organization.
  • High personal integrity, ability to decide and take responsibility.
  • Driver's license and readiness to travel (regular business trips to branch Frenštát p. Radhoštěm, Prague and Germany).

Can you help us drive our vision for the future? Do you like supplier management? Thenwe are looking for you! Become part of the manufacturing plants in Mohelnice and Frenštát p. Radhoštěm! The Head of Strategic Procurement for two production plants of low voltage motors located in Mohelnice and Frenštát p. Radhoštěm is a leadership role responsible for overseeing and executing procurement strategies aligned with organizational objectives. This role involves leading a team of procurement professionals, establishing vendor relationships, negotiating contracts, and optimizing procurement processes to ensure efficiency and cost-effectiveness. The Head of Strategic Procurement plays a pivotal role in driving strategic decision-making related to sourcing, purchasing, and supplier management to support the organization's overall growth and success.

Your future responsibilities:

  • Collaborate with factory and global management to develop long-term procurement strategies and initiatives.
  • Formulate and implement global procurement strategies in line with organizational goals and objectives.
  • Identify opportunities for cost savings, process improvement, and risk mitigation within the procurement function.
  • Build and maintain strong relationships with key suppliers and vendors.
  • Negotiate contracts, terms, and pricing agreements to optimize value and mitigate risks.
  • Monitor supplier performance and address any issues or concerns in a timely manner.
  • Develop and manage of the procurement budget.
  • Monitor procurement expenditures and identify opportunities for cost reduction and savings.
  • Cooperation in auditing and resolving supplier ratings (quality assessment).
  • Ensure compliance with relevant regulations and internal policies throughout the procurement process.
  • Lead and mentor a team of procurement professionals, fostering a collaborative and high-performance work environment.

What you can look forward to:

  • Opportunities for professional development and career advancement.
  • Dynamic and collaborative work environment.
  • Exciting projects, cooperation with leading specialists.
  • Friendly staff enthusiastic about electric motors.

Extra benefits:

  • 25 leave days and a variety of flexible working models that allow time off for yourself.
  • Various discounts and offers.
  • Competitive salary and business car.
  • Annual bonus.
  • Home office 2 days per week.
  • E-voucher card - for meal vouchers.
  • Broad range of wellbeing offerings - annual cafeteria „Benefit Plus“ budget with any use on the benefit-plus website (e.g. language course, cultural and sporting events, cinema etc.), MultiSport card, various discounts and offers.

Your profile:

  • Proven track record in strategic procurement, sourcing and supplier management preferably in manufacturing organization demonstrated with leadership capabilities (at least 5 years).
  • Strong negotiation skills and ability to manage complex vendor relationships.
  • Fluency in English is a necessary.
  • The ability to use the Czech language is a great advantage .
  • Effective communication and interpersonal skills, with the ability to collaborate cross-functionally and influence stakeholders at all levels of the organization.
  • High personal integrity, ability to decide and take responsibility.
  • Driver's license and readiness to travel (regular business trips to branch Frenštát p. Radhoštěm, Prague and Germany).

Do IT týmu aktuálně vypisujeme pozici „IT Konzultanta.“ Hledáme komunikativního kolegu/kolegyni, který bude mít na starosti Use IT centrum.

Budete se věnovat především:

  • samostatnému vedení Use IT centra
  • denní komunikaci s uživateli office IT techniky, pomoc s vyřizováním požadavků ve firemním IT portálu
  • eskalaci a pomoc s problémovými tickety
  • udržování systému uživatelských návodů a dokumentace na firemním Intranetu
  • školení klíčových uživatelů na práci s objednávkovým portálem a produkty O365
  • pomoci s uživatelskými instalacemi office aplikací
  • udržování dostatečných skladových zásob potřebného HW
  • aktivnímu zapojení při plošných projektech týkajících se office IT techniky (např. migrace WIN klientů na nový OS)
  • intenzivní synergické spolupráci s ostatními partnerskými jednotkami v oblasti své působnosti

Další benefity:

  • 5 týdnů dovolené
  • roční příspěvek do programu Benefit plus
  • odměny při životním a pracovním jubileu
  • zvýhodněné nabídky pro zaměstnance
  • závodní stravování
  • dobrovolnický den, společenské a kulturní akce
  • otevřené možnosti expertního růstu
  • pružnou pracovní dobu, možnost využití HO
  • Multisport kartu

Měl/a byste mít:

  • zkušenosti s používáním produktů O365
  • zkušenosti s používáním Windows
  • praktické zkušenosti se školící činností výhodou
  • zkušenosti s prací na ServiceDesku výhodou
  • komunikativní znalost AJ
  • proaktivní přístup
  • zodpovědný, samostatný a flexibilní postoj
  • otevřený novým nápadům a metodám

In Information Technology we take care on digitalization of Innomotics processes. Before we write even a single line of code or customize the standard software product, we have to understand what drives our business. Only then we implement things on the technical side – trying, testing, and improving outcomes until a final solution emerges. We enjoy the freedom to think in completely new categories and to organize our own work. For us, knowledge means exchange – discussions with colleagues from all over the world. We feed our ideas into many sectors of the economy, thus creating the basis for innovative technical solutions. Join our team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will implement and drive the further development of Innomotics’s global SAP S/Hana system, being responsible for SAP basis topics as part of the global team, including the coordination activities for the rollouts across Innomotics’s sites and regions.
  • You will be responsible for SAP basis operations, Solman solution and their development. To this end, you will control the development, maintenance and roll-out of functionalities and interfaces.
  • You control and direct the development of an ERP architecture based on new technologies and trends, which requires strong alignment across different projects / programs.
  • You coordinate and drive all necessary upgrade and patching activities together with solution suppliers and consulting partners.
  • You define, create, and maintain software interfaces to other applications and ensure their availability.
  • You verify and validate concepts and specifications against requirements and standards.
  • The participation in the exchange of experience with other experts and the organization of the transfer of know-how within the global Innomotics organization also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, evoucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have multi-year experience in SAP basis operations, preferably already in S/4 Hana and software development.
  • Additional you already gained around 5 years of experience successfully working as SAP Basis expert in a global team.
  • You have advanced knowledge in modern SW development approaches, state of the art interface and cloud technologies.
  • Therefore, you are able to design technical realization concepts based on new technologies.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level English language skills round off your profile.

In Information Technology we take care on digitalization of Innomotics processes. Before we write even a single line of code or customize the standard software product, we have to understand what drives our business. Only then we implement things on the technical side – trying, testing, and improving outcomes until a final solution emerges. We enjoy the freedom to think in completely new categories and to organize our own work. For us, knowledge means exchange – discussions with colleagues from all over the world. We feed our ideas into many sectors of the economy, thus creating the basis for innovative technical solutions. Join our team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will implement and drive the further development of Innomotics’s global SAP S/Hana system, being responsible for SAP basis topics as part of the global team, including the coordination activities for the rollouts across Innomotics’s sites and regions.
  • You will be responsible for SAP basis operations, Solman solution and their development. To this end, you will control the development, maintenance and roll-out of functionalities and interfaces.
  • You control and direct the development of an ERP architecture based on new technologies and trends, which requires strong alignment across different projects / programs.
  • You coordinate and drive all necessary upgrade and patching activities together with solution suppliers and consulting partners.
  • You define, create, and maintain software interfaces to other applications and ensure their availability.
  • You verify and validate concepts and specifications against requirements and standards.
  • The participation in the exchange of experience with other experts and the organization of the transfer of know-how within the global Innomotics organization also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, evoucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have multi-year experience in SAP basis operations, preferably already in S/4 Hana and software development.
  • Additional you already gained around 5 years of experience successfully working as SAP Basis expert in a global team.
  • You have advanced knowledge in modern SW development approaches, state of the art interface and cloud technologies.
  • Therefore, you are able to design technical realization concepts based on new technologies.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level English language skills round off your profile.

In Information Technology we take care on digitalization of Innomotics processes. Before we write even a single line of code or customize the standard software product, we have to understand what drives our business. Only then we implement things on the technical side – trying, testing, and improving outcomes until a final solution emerges. We enjoy the freedom to think in completely new categories and to organize our own work. For us, knowledge means exchange – discussions with colleagues from all over the world. We feed our ideas into many sectors of the economy, thus creating the basis for innovative technical solutions. Join our team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will implement and drive the further development of Innomotics’s global SAP S/Hana system, being responsible for SAP basis topics as part of the global team, including the coordination activities for the rollouts across Innomotics’s sites and regions.
  • You will be responsible for SAP basis operations, Solman solution and their development. To this end, you will control the development, maintenance and roll-out of functionalities and interfaces.
  • You control and direct the development of an ERP architecture based on new technologies and trends, which requires strong alignment across different projects / programs.
  • You coordinate and drive all necessary upgrade and patching activities together with solution suppliers and consulting partners.
  • You define, create, and maintain software interfaces to other applications and ensure their availability.
  • You verify and validate concepts and specifications against requirements and standards.
  • The participation in the exchange of experience with other experts and the organization of the transfer of know-how within the global Innomotics organization also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, evoucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have multi-year experience in SAP basis operations, preferably already in S/4 Hana and software development.
  • Additional you already gained around 5 years of experience successfully working as SAP Basis expert in a global team.
  • You have advanced knowledge in modern SW development approaches, state of the art interface and cloud technologies.
  • Therefore, you are able to design technical realization concepts based on new technologies.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level English language skills round off your profile.

We are looking for a SAP FICO specialist. Join our ERP team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will drive the further development of Innomotics’s SAP systems (ECC, being fully responsible for FI and CO modules and respective interfaces.
  • You will be responsible for ensuring that the FI and CO functions can be used in accordance with the requirements. To this end, you will control the development, maintenance and roll-out of functionalities and interfaces.
  • You understand the Innomotics’s business processes in Finance and Controlling and its goals and develop the necessary solutions to ensure a fast response to new market requirements.
  • You advise, consult and support Innomotics’s departments, regions and factories in best usage and utilization of the system.
  • You verify and validate concepts and specifications against requirements and standards.
  • The participation in the exchange of experience with other experts and the organization of the transfer of know-how within the global Innomotics’s organization also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have experience with SAP FI and CO modules.
  • Additional you already gained several years of experience successfully working in projects.
  • You have knowledge in modern software development approaches.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level German and English language skills round off your profile.

We are looking for a SAP FICO specialist. Join our ERP team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will drive the further development of Innomotics’s SAP systems (ECC, being fully responsible for FI and CO modules and respective interfaces.
  • You will be responsible for ensuring that the FI and CO functions can be used in accordance with the requirements. To this end, you will control the development, maintenance and roll-out of functionalities and interfaces.
  • You understand the Innomotics’s business processes in Finance and Controlling and its goals and develop the necessary solutions to ensure a fast response to new market requirements.
  • You advise, consult and support Innomotics’s departments, regions and factories in best usage and utilization of the system.
  • You verify and validate concepts and specifications against requirements and standards.
  • The participation in the exchange of experience with other experts and the organization of the transfer of know-how within the global Innomotics’s organization also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have experience with SAP FI and CO modules.
  • Additional you already gained several years of experience successfully working in projects.
  • You have knowledge in modern software development approaches.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level German and English language skills round off your profile.

We are looking for a SAP FICO specialist. Join our ERP team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will drive the further development of Innomotics’s SAP systems (ECC, being fully responsible for FI and CO modules and respective interfaces.
  • You will be responsible for ensuring that the FI and CO functions can be used in accordance with the requirements. To this end, you will control the development, maintenance and roll-out of functionalities and interfaces.
  • You understand the Innomotics’s business processes in Finance and Controlling and its goals and develop the necessary solutions to ensure a fast response to new market requirements.
  • You advise, consult and support Innomotics’s departments, regions and factories in best usage and utilization of the system.
  • You verify and validate concepts and specifications against requirements and standards.
  • The participation in the exchange of experience with other experts and the organization of the transfer of know-how within the global Innomotics’s organization also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have experience with SAP FI and CO modules.
  • Additional you already gained several years of experience successfully working in projects.
  • You have knowledge in modern software development approaches.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level German and English language skills round off your profile.

We are looking for a SAP FICO User engagement specialist. Join our ERP team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will support he further development of Innomotics’s SAP systems (ECC, S/4 Hana) by sharing information to key users and coordinate key users’ involvement in HQ initiatives.
  • You will be responsible for ensuring that the FI and CO functions can be used in accordance with the requirements.
  • You understand the Innomotics’s business processes in Finance and Controlling and its goals.
  • You collect documentation from FI/ HR solutions and support users from different departments, regions, and factories in best usage of the documentation.
  • The organization and participation in the exchange of experience with SAP experts and the organization of the know-how sharing within the global Innomotics’s ERP team also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You have experience with SAP FI and CO modules as user.
  • Additional you have experience in successful support of projects in a company.
  • You have interest in modern technology.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level Czech and English language skills round off your profile. German language skills are welcome.

We are looking for a SAP FICO User engagement specialist. Join our ERP team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will support he further development of Innomotics’s SAP systems (ECC, S/4 Hana) by sharing information to key users and coordinate key users’ involvement in HQ initiatives.
  • You will be responsible for ensuring that the FI and CO functions can be used in accordance with the requirements.
  • You understand the Innomotics’s business processes in Finance and Controlling and its goals.
  • You collect documentation from FI/ HR solutions and support users from different departments, regions, and factories in best usage of the documentation.
  • The organization and participation in the exchange of experience with SAP experts and the organization of the know-how sharing within the global Innomotics’s ERP team also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You have experience with SAP FI and CO modules as user.
  • Additional you have experience in successful support of projects in a company.
  • You have interest in modern technology.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level Czech and English language skills round off your profile. German language skills are welcome.

We are looking for a SAP FICO User engagement specialist. Join our ERP team, and we will offer the necessary support to give you responsibility and enable you to have an international career.

Your future responsibilities:

  • You will support he further development of Innomotics’s SAP systems (ECC, S/4 Hana) by sharing information to key users and coordinate key users’ involvement in HQ initiatives.
  • You will be responsible for ensuring that the FI and CO functions can be used in accordance with the requirements.
  • You understand the Innomotics’s business processes in Finance and Controlling and its goals.
  • You collect documentation from FI/ HR solutions and support users from different departments, regions, and factories in best usage of the documentation.
  • The organization and participation in the exchange of experience with SAP experts and the organization of the know-how sharing within the global Innomotics’s ERP team also belongs to your new area of responsibility.

What you can look forward to:

  • Daily use of the English language.
  • Motivational salary, company computer and phone.
  • Flexible working hours and possibility of home office.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You have experience with SAP FI and CO modules as user.
  • Additional you have experience in successful support of projects in a company.
  • You have interest in modern technology.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level Czech and English language skills round off your profile. German language skills are welcome.

Baví Vás konstruování, práce s modely, tvorba výrobní dokumentace a zlepšování toho co už vymyslel někdo před Vámi? Jsme tým konstruktérů společnosti Innomotics pracujících pro sesterský podnik v německém Berlíně. Vytváříme výrobní dokumentaci kusovou výrobu speciálních elektromotorů. Pracujeme na návrhu nejen jednotlivých komponent, ale rovněž celých strojů a řešíme jejich celkovou montáž. Na pozici Vás čeká tvorba nových nebo úprava již existujících modelů, tvorba výrobní a zákaznické dokumentace, mechanické výpočty, řešení problémů ve výrobě a v neposlední řadě i optimalizace, vylepšování a hledání nových možností, které je možné ve firmě uplatnit. Pozice je vhodná i pro šikovné absolventy!

Budete se věnovat především:

  • Spolupráci na nových projektech.
  • Tvorbě modelů, výkresů a kusovníků dle zákaznické nebo výpočtové specifikace.
  • Spolupráci s kolegy v jiných Innomotics závodech napříč světem.

Můžete se těšit zejména na:

  • Prohlubování svých znalostí v interních procesech.
  • Zaměstnání ve stabilní firmě.
  • Odborné a jazykové vzdělávání, osobní rozvoj.
  • Možnost získání nových zkušeností v podnikovém systému NX, Projektierungsprogram, SAP a Teamcenter.

Další benefity:

  • Mzdu dle vaší odbornosti, výkonnosti a kvality vaší práce.
  • 5 týdnů dovolené.
  • Pracovní dobu 7,5 hodiny denně s možností práce z domova.
  • Flexibilní pracovní dobu.
  • Stravenky.
  • Cafeteria systém Benefit Plus.
  • Multisport karta.
  • Firemní rekreační středisko na Vysočině.
  • Program slev pro zaměstnance.
  • Firemní jazykové vzdělávání.

Měl/a byste mít:

  • SŠ/VŠ vzdělání strojního směru.
  • Zkušenost s prací v 3D CAD programech (NX výhodou).
  • Systémové/analytické myšlení.
  • Aktivní znalost Aj nebo Nj – slovem i písmem.
  • Pokročilou znalost češtiny.
  • Uživatelskou znalost práce na PC.
  • Znalost MS Office (především Excel).
  • Dobré komunikační schopnosti.
  • Umět číst výkresovou dokumentaci.
  • Výhodou je, pokud máte:
  • Praxi na pozici konstruktéra.
  • Základy programování (Excel, Basic).
  • Znalost 3D modelování.

Jsme vývojový tým, který pro koncern INNOMOTICS připravuje nové koncepce elektromotorů a generátorů v širokém spektru výkonů a otáček na míru zákazníkům z celého světa. Naším úkolem je vývoj produktu se špičkovými technickými parametry a nízkými náklady. Vytváříme nové návrhy, 3D modely, výkresovou dokumentaci, kusovníky a také Jsme tým konstrukce, který pro Innomotics Drásov připravuje dokumentaci k zakázkově vyráběným elektromotorům a generátorům vysokých výkonů (do 25 MW / 35 MVA) na míru zákazníkům z celého světa. Naším úkolem je zkonstruování produktu se špičkovými technickými parametry a nízkými náklady. Pro něj vytvoříme návrhy, 3D modely, výkresovou dokumentaci a kusovníky. Zpracováváme celé sestavy strojů nebo jejich komponenty např. rotory, statory, kostry a štíty, skříně chladičů, olejové a vodohospodářství. Pojďte k nám a staňte se členem našeho špičkového týmu!

Budete se věnovat především:

  • Tvorbě výkresů a kusovníků pro elektrické točivé stroje pomocí 3D CAD
  • Přípravě a realizaci konstrukčních změn
  • Uvolňování dokumentace v Team Centre
  • Technickému řízení elektrických částí strojů
  • Řešení neshod a neshodných dílů

Můžete se těšit zejména na:

  • Práci, která vás bude bavit
  • Zaškolení na využívaný 3D CAD NX a TEAMCENTER
  • Prostor pro inovaci a kreativitu
  • Možnosti spolupráce v mezinárodním týmu
  • Stabilní zázemí velké mezinárodní společnosti

Další benefity:

  • 5 týdnů dovolené
  • Místo výkonu práce: Praha Stodůlky
  • Stravenky
  • Flexibilní pracovní doba s pevným jádrem a možností práce z domova
  • Roční budget na zdraví a volnočasové aktivity (Benefit plus) 32000,- Kč
  • Program slev pro zaměstnance
  • Firemní jazykové vzdělávání
  • Možnost Multisport karty

Měl/a byste mít:

  • Samostatnost, flexibilitu
  • VŠ případně SŠ vzdělání strojního/elektrotechnického směru
  • Znalost jakéhokoliv 3D CAD systému výhodou
  • Pokročilou uživatelskou znalost práce s PC
  • Základní znalost AJ
  • Pokročilou znalost ČJ
  • Zodpovědnost a ochotu se učit novým věcem
  • Příležitost vhodná i pro absolventy, praxe výhodou

with us. Will you join us?

Budete se věnovat především:

  • Introduction of Lean at chosen suppliers and optimization of supplier's operations by application of E2E Lean Methodology for Manufacturing, Logistics and on Company level at supplier
  • Self-initiated identification of improvement potentials and proposal of supplier candidates to supplied businesses incl. alignment on next steps
  • Early involving and coordinating project-related cross-functions of Innomotics to ensure project success
  • Lead of Lean Projects at supplier and mentoring Innomotics' and supplier's lean teams
  • Responsible for the complete project and change management from
  • Setting up projects incl. successful Supplier Buy-in
  • Onsite evaluation of supplier and identification/ realization of optimization measures
  • Accompanying, guiding and coaching the supplier during his lean transformation phase (on- and offsite work)
  • Regular reporting of supplier progresses and improvement results to joint SteerCos, Heads of GVP and Segments and to the Top Management of Innomotics
  • Ensuring of reaching agreed targets (e.g. introduction of lean, reduction of lead time, productivity increases, increases in flexibility, ….) and continuous follow-up with supplier
  • Being 1st contact for our cross-functions like segment/ factory management (CEO, CFO, operations, procurement, logistics, quality, R&D) for lean optimization of suppliers
  • Continuous benchmarking and improvement of our Innomotics Lean@Suppliers Program to be best-in-class
  • Ready for supplier visits globally

Další benefity:

  • competitive salary
  • annual bonus
  • 25 leave days and a variety of flexible working models that allow time off for yourself and your family
  • home office 2 to 3 days per week
  • e-voucher card - for meal vouchers
  • broad range of wellbeing offerings - annual cafeteria budget with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers
  • possible place of work: Drásov, Frenštát, Mohelnice, Brno, Praha, Ostrava

Měl/a byste mít:

  • Bachelor´s degree or Master´s degree in Supply Chain, Operations Management, Industrial Engineering, or equivalent experience as Masters or Technician
  • 7-10+ years’ manufacturing expertise including Lean Manufacturing in mechanical and electro-mechanical productions, further experiences in electronics productions appreciated
  • You are a passionate lean practitioner based on a sound theoretical knowledge equivalent to Senior Lean Expert, Experience in Lean Admin/ Business appreciated
  • Several years of experience in project and change management as well as supplier development projects, incl. regular reporting to Top Management
  • International/ Intercultural working experience, English fluently and German language appreciated

of engineering experience. Today, we are changing the definition of reliable performance - from standard products to the highest efficiency electric

Budete se věnovat především:

  • Introduction of Lean at chosen suppliers and optimization of supplier's operations by application of E2E Lean Methodology for Manufacturing, Logistics and on Company level at supplier
  • Self-initiated identification of improvement potentials and proposal of supplier candidates to supplied businesses incl. alignment on next steps
  • Early involving and coordinating project-related cross-functions of Innomotics to ensure project success
  • Lead of Lean Projects at supplier and mentoring Innomotics' and supplier's lean teams
  • Responsible for the complete project and change management from
  • Setting up projects incl. successful Supplier Buy-in
  • Onsite evaluation of supplier and identification/ realization of optimization measures
  • Accompanying, guiding and coaching the supplier during his lean transformation phase (on- and offsite work)
  • Regular reporting of supplier progresses and improvement results to joint SteerCos, Heads of GVP and Segments and to the Top Management of Innomotics
  • Ensuring of reaching agreed targets (e.g. introduction of lean, reduction of lead time, productivity increases, increases in flexibility, ….) and continuous follow-up with supplier
  • Being 1st contact for our cross-functions like segment/ factory management (CEO, CFO, operations, procurement, logistics, quality, R&D) for lean optimization of suppliers
  • Continuous benchmarking and improvement of our Innomotics Lean@Suppliers Program to be best-in-class
  • Ready for supplier visits globally

Další benefity:

  • competitive salary
  • annual bonus
  • 25 leave days and a variety of flexible working models that allow time off for yourself and your family
  • home office 2 to 3 days per week
  • e-voucher card - for meal vouchers
  • broad range of wellbeing offerings - annual cafeteria budget with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers
  • possible place of work: Drásov, Frenštát, Mohelnice, Brno, Praha, Ostrava

Měl/a byste mít:

  • Bachelor´s degree or Master´s degree in Supply Chain, Operations Management, Industrial Engineering, or equivalent experience as Masters or Technician
  • 7-10+ years’ manufacturing expertise including Lean Manufacturing in mechanical and electro-mechanical productions, further experiences in electronics productions appreciated
  • You are a passionate lean practitioner based on a sound theoretical knowledge equivalent to Senior Lean Expert, Experience in Lean Admin/ Business appreciated
  • Several years of experience in project and change management as well as supplier development projects, incl. regular reporting to Top Management
  • International/ Intercultural working experience, English fluently and German language appreciated

motors; from simple on/off, to everything smart in between. Our most powerful motor? The 15,000 experts, colleagues who make the world go round

Budete se věnovat především:

  • Introduction of Lean at chosen suppliers and optimization of supplier's operations by application of E2E Lean Methodology for Manufacturing, Logistics and on Company level at supplier
  • Self-initiated identification of improvement potentials and proposal of supplier candidates to supplied businesses incl. alignment on next steps
  • Early involving and coordinating project-related cross-functions of Innomotics to ensure project success
  • Lead of Lean Projects at supplier and mentoring Innomotics' and supplier's lean teams
  • Responsible for the complete project and change management from
  • Setting up projects incl. successful Supplier Buy-in
  • Onsite evaluation of supplier and identification/ realization of optimization measures
  • Accompanying, guiding and coaching the supplier during his lean transformation phase (on- and offsite work)
  • Regular reporting of supplier progresses and improvement results to joint SteerCos, Heads of GVP and Segments and to the Top Management of Innomotics
  • Ensuring of reaching agreed targets (e.g. introduction of lean, reduction of lead time, productivity increases, increases in flexibility, ….) and continuous follow-up with supplier
  • Being 1st contact for our cross-functions like segment/ factory management (CEO, CFO, operations, procurement, logistics, quality, R&D) for lean optimization of suppliers
  • Continuous benchmarking and improvement of our Innomotics Lean@Suppliers Program to be best-in-class
  • Ready for supplier visits globally

Další benefity:

  • competitive salary
  • annual bonus
  • 25 leave days and a variety of flexible working models that allow time off for yourself and your family
  • home office 2 to 3 days per week
  • e-voucher card - for meal vouchers
  • broad range of wellbeing offerings - annual cafeteria budget with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers
  • possible place of work: Drásov, Frenštát, Mohelnice, Brno, Praha, Ostrava

Měl/a byste mít:

  • Bachelor´s degree or Master´s degree in Supply Chain, Operations Management, Industrial Engineering, or equivalent experience as Masters or Technician
  • 7-10+ years’ manufacturing expertise including Lean Manufacturing in mechanical and electro-mechanical productions, further experiences in electronics productions appreciated
  • You are a passionate lean practitioner based on a sound theoretical knowledge equivalent to Senior Lean Expert, Experience in Lean Admin/ Business appreciated
  • Several years of experience in project and change management as well as supplier development projects, incl. regular reporting to Top Management
  • International/ Intercultural working experience, English fluently and German language appreciated

You are part of our Global Value Procurement team and responsible for driving optimization of operations of chosen Innomotics suppliers by applying lean methodology. Within a small Innomotics team, you are expected to self-initiate supplier improvement projects and to plan, to prepare and to lead lean projects onsite at supplier to sustainably reduce lead times, to identify wastes and to increase overall productivity of the supplier. You are well experienced to apply necessary lean methods like Value Stream Mapping, 5S, Kaizen, SMED, TPM/OEE, Kata, Bottleneck Analysis and others even at suppliers with no lean experience and/ or in challenging supply situations. You are used to communicating well at all levels and thus speak the language of the shopfloor just as well as that of management. You will frequently report progress and concrete improvement results to your project Steer Co's incl. Top Management of supplier as well as to the Heads of GVP and Segments and to the Top Management of Innomotics. In this role, you are expected to travel to our suppliers globally (~40% of time).

Budete se věnovat především:

  • Introduction of Lean at chosen suppliers and optimization of supplier's operations by application of E2E Lean Methodology for Manufacturing, Logistics and on Company level at supplier
  • Self-initiated identification of improvement potentials and proposal of supplier candidates to supplied businesses incl. alignment on next steps
  • Early involving and coordinating project-related cross-functions of Innomotics to ensure project success
  • Lead of Lean Projects at supplier and mentoring Innomotics' and supplier's lean teams
  • Responsible for the complete project and change management from
  • Setting up projects incl. successful Supplier Buy-in
  • Onsite evaluation of supplier and identification/ realization of optimization measures
  • Accompanying, guiding and coaching the supplier during his lean transformation phase (on- and offsite work)
  • Regular reporting of supplier progresses and improvement results to joint SteerCos, Heads of GVP and Segments and to the Top Management of Innomotics
  • Ensuring of reaching agreed targets (e.g. introduction of lean, reduction of lead time, productivity increases, increases in flexibility, ….) and continuous follow-up with supplier
  • Being 1st contact for our cross-functions like segment/ factory management (CEO, CFO, operations, procurement, logistics, quality, R&D) for lean optimization of suppliers
  • Continuous benchmarking and improvement of our Innomotics Lean@Suppliers Program to be best-in-class
  • Ready for supplier visits globally

Další benefity:

  • competitive salary
  • annual bonus
  • 25 leave days and a variety of flexible working models that allow time off for yourself and your family
  • home office 2 to 3 days per week
  • e-voucher card - for meal vouchers
  • broad range of wellbeing offerings - annual cafeteria budget with any use on the benefit-plus website (e.g. language course, cultural and sporting events, etc.), various discounts and offers
  • possible place of work: Drásov, Frenštát, Mohelnice, Brno, Praha, Ostrava

Měl/a byste mít:

  • Bachelor´s degree or Master´s degree in Supply Chain, Operations Management, Industrial Engineering, or equivalent experience as Masters or Technician
  • 7-10+ years’ manufacturing expertise including Lean Manufacturing in mechanical and electro-mechanical productions, further experiences in electronics productions appreciated
  • You are a passionate lean practitioner based on a sound theoretical knowledge equivalent to Senior Lean Expert, Experience in Lean Admin/ Business appreciated
  • Several years of experience in project and change management as well as supplier development projects, incl. regular reporting to Top Management
  • International/ Intercultural working experience, English fluently and German language appreciated

Zajímá tě marketing/komunikace a chceš se dále rozvíjet v B2B komunikaci? Jsi kreativní a nebojíš se výzev? Máš bezchybnou češtinu a angličtina ti nedělá problém? Pokud ano, čti dál. Máme roli přímo pro tebe!

Budete se věnovat především:

  • zajištění interní komunikace (zaměstnanecké noviny, e-mailové newslettery, digitální infopanely a další)
  • spolupráce na přípravě lokálních tiskových zpráv
  • příprava marketingových kampaní
  • koordinace natáčení videí a focení (interní akce, reference)
  • příprava obsahu pro webové stránky a sociální sítě (FB, LinkedIn, interní komunikační síť)
  • organizace interních a externích eventů
  • marketingová podpora obchodních a dalších týmů (jsme zvyklí si pomáhat navzájem :))
  • zajištění brandových a rebrandových aktivit
  • řízení projektů v oblasti CSR
  • spolupráce na tvorbě a řízení ročního marketingového budgetu
  • spolupráce na globálních marketingových projektech a další činnosti v rámci českého týmu komunikace

Můžete se těšit zejména na:

  • pracoviště ve Frenštátě pod Radhoštěm
  • prostor pro realizaci vlastních nápadů a učení se novým věcem
  • 5 týdnů dovolené (možnost čerpání až 5 dní dalšího volna z cafeterie benefitů)
  • pracovní doba 7,5 hodiny
  • flexibilní pracovní doba s pevným jádrem (9:00-14:00)
  • možnost práce z domova až 2 dny v týdnu
  • 32000 Kč ročně na zdraví a volnočasové aktivity (Benefit Plus)
  • program slev pro zaměstnance
  • firemní jazykové vzdělávání
  • stravenky a závodní jídelnu přímo v závodě

Měl/a byste mít:

  • velkou výhodou jsou zkušenosti v oblasti komunikace, digitální komunikace, marketingu
  • oceníme studium PR/marketingu nebo souvisejících oblastí
  • znalost anglického jazyka pro každodenní verbální a písemnou komunikaci, výbornou češtinu s kritickým okem pro korektury, interpunkci a gramatiku
  • být kreativní, soběstačný a udržovat pozitivní myšlení
  • být organizačně schopný, mít drive a nebát se ukázat své nápady

Náš Product data management tým hledá technicky zdatného člověka, který se bude věnovat tvorbě a úpravám chytrých 3D modelů v programu NX, vytváření programu pro automatizaci tvorby modelů nebo sestav a poskytování podpory uživatelům. Zaměřujeme se na hluboké porozumění procesům a naší prací je nastavovat systémy, definovat pravidla, digitalizovat a posouvat procesy na další úroveň. V rámci Innomotics spolupracujeme s ostatními závody na harmonizaci procesů a sdílení zkušeností. Naší silnou stránkou je soudržnost a týmovost a hledáme k sobě parťáka se stejnými předpoklady.

Budete se věnovat především:

  • Poskytování podpory uživatelům v oblasti NX, Teamcenter a procesů.
  • Tvorba chytrých 3D modelů a jejich úpravy.
  • Práce v aplikaci Rulestream.
  • Školení uživatelů na TC a NX.
  • Hledání nových systémových řešení.
  • Testování update systémů a nových funkcí.
  • Účast na projektech věnujících se digitalizaci, bezpapírové výrobě.

Můžete se těšit zejména na:

  • Různorodou práci, která vás bude bavit, plnou náročných výzev.
  • Zaškolení na využívaný 3D CAD NX a TEAMCENTER.
  • Prostor pro inovaci a kreativitu.
  • Spolupráce v mezinárodním týmu.
  • Stabilní zázemí velké mezinárodní společnosti.

Další benefity:

  • Místo výkonu práce: Drásov.
  • 5 týdnů dovolené.
  • Závodní stravování za zvýhodněnou cenu.
  • Flexibilní pracovní dobu s pevným jádrem.
  • 32000,- ročně na zdraví a volnočasové aktivity (Benefit plus).
  • Program slev pro zaměstnance (O2, T-mobile, Opel, KFC,…)

Měl/a byste mít:

  • Zodpovědnost a ochotu se učit novým věcem.
  • Samostatnost, flexibilitu.
  • VŠ případně SŠ vzdělání technického směru.
  • Znalost jakéhokoliv 3D CAD systému podmínkou.
  • Pokročilou uživatelskou znalost práce s PC.
  • Pokročilou znalost AJ.
  • Příležitost vhodná i pro absolventy, praxe výhodou.
  • Znalost NX výhodou.
  • Smysl pro detail a preciznost.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team.

Your future responsibilities:

  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team. Job Summary: As part of our dedication to excellence and security, we are seeking a highly skilled Cybersecurity Specialist to join our Procurement team. This role will play a pivotal part in ensuring the alignment of processes, data management, and cybersecurity practices within our SCM operations.

Your future responsibilities:

  • Central Process and Data Management Alignment:
  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes.
  • Cybersecurity Integration:
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Process Alignment and Discussion:
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Cybersecurity Supplier Risk Management:
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Regulatory Compliance:
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Training and Communication:
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Tool Competencies and Automation:
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Contract Management:
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team.

Your future responsibilities:

  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team.

Your future responsibilities:

  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team. Job Summary: As part of our dedication to excellence and security, we are seeking a highly skilled Cybersecurity Specialist to join our Procurement team. This role will play a pivotal part in ensuring the alignment of processes, data management, and cybersecurity practices within our SCM operations.

Your future responsibilities:

  • Central Process and Data Management Alignment:
  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes.
  • Cybersecurity Integration:
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Process Alignment and Discussion:
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Cybersecurity Supplier Risk Management:
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Regulatory Compliance:
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Training and Communication:
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Tool Competencies and Automation:
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Contract Management:
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team. Job Summary: As part of our dedication to excellence and security, we are seeking a highly skilled Cybersecurity Specialist to join our Procurement team. This role will play a pivotal part in ensuring the alignment of processes, data management, and cybersecurity practices within our SCM operations.

Your future responsibilities:

  • Central Process and Data Management Alignment:
  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes.
  • Cybersecurity Integration:
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Process Alignment and Discussion:
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Cybersecurity Supplier Risk Management:
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Regulatory Compliance:
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Training and Communication:
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Tool Competencies and Automation:
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Contract Management:
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds, and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. Become part of our global digital business team.

Your future responsibilities:

  • Align processes and data management practices across Procurement with cybersecurity standards and best practices.
  • Integrate cybersecurity measures seamlessly into existing Procurement processes
  • Incorporate cybersecurity measures into Procurement operations and processes.
  • Ensure all Procurement processes are compliant with cybersecurity standards and regulations.
  • Facilitate discussions and alignment of process topics within Procurement and with Cybersecurity (CYS) teams.
  • Challenge RACI Matrix and Procurement roles and responsibilities to ensure efficiency and security.
  • Collaborate closely with Cybersecurity Risk Management to assess and mitigate supplier risks.
  • Ensure adherence to cybersecurity standards in supplier contracts.
  • Stay updated with new cybersecurity regulations and laws (e.g., NIS2, CRA) and inform Procurement organization accordingly.
  • Check all CYS regulations and assess their impact on Procurement processes.
  • Conduct regular trainings on cybersecurity topics for Procurement and our external partners.
  • Drive communication of cybersecurity topics within Procurement and to our suppliers.
  • Ensure competency and guidance on cybersecurity tools landscape within Procurement.
  • Drive automation in the Procurement IT environment.
  • Support SCM and Procurement in updating old contracts to include cybersecurity clauses.
  • Ensure transparency and compliance with cybersecurity requirements in all contracts.

Your profile:

  • Bachelor’s degree in Business, Supply Chain Management, or related field.
  • Proven experience in procurement, with a focus on Cybersecurity.
  • Strong analytical and problem-solving skills, with the ability to make data-driven decisions.
  • Excellent communication and interpersonal skills to effectively collaborate with internal and external stakeholders.
  • Solid project management skills
  • Ability to adapt to a dynamic environment and lead change management efforts.
  • Excellent English-skills, both spoken and written, round up your profile, German-skills would be an advantage.

Jste technický typ se zájmem o oblast digitalizace a máte zkušenosti s programováním? V našem technologickém vývojovém centru se zabýváme vývojem jednoúčelových zařízení pro aplikace ve výrobě nízkonapěťových asynchronních elektromotorů. Nabízíme vám příležitost pracovat na projektu digitalizace pracovišť jednotlivých výrobních technologií – náš projektový tým zajištuje kompletní vývoj pracovišť pro průmyslovou automatizaci. Přidejte se k nám!

Budete se věnovat především:

  • vývoji aplikačního SW pro řídící systémy v jednoúčelových zařízeních (PLC, HMI, robotů)
  • návrhu koncepce automatizace
  • oživení a uvedení řídicích systémů do provozu
  • optimalizaci výrobních procesů
  • uvádění nejmodernějších robotických pracovišť a jednoúčelových výrobních strojů, linek do provozu
  • integraci moderních robotických výrobních technologií
  • tvorbě dokumentace, manuálů a návodů pro obsluhu zařízení
  • vyjasňování technických požadavků zákazníka
  • technické realizaci zakázky, spoluúčasti na kompletaci zařízení
  • týmové práci ve vývojových projektech

Můžete se těšit zejména na:

  • pestrou práci a zajímavé projekty
  • fajn tým, který drží při sobě a vzájemně se podporuje
  • možnost seberealizace a získání nových zkušeností v oblasti digitalizace
  • moderní pracovní prostředí a práci s nejnovějšími technologiemi

Další benefity:

  • pružná pracovní doba a 5 týdnů dovolené
  • roční bonus
  • závodní stravování a příspěvek na stravu
  • částka 32 000 Kč/ rok do programu Benefit Plus
  • akce pro zaměstnance
  • a mnohé další

Měl/a byste mít:

  • min. SŠ vzdělání v odpovídajícím oboru (automatizace, řídící systémy, programování apod.)
  • znalosti a zkušenosti s oživováním jednoúčelových výrobních strojů, linek, robotických výrobních technologií
  • znalost řídících systémů Siemens (S7-1200, S7-1500)
  • znalost programování PLC, SCADA Siemens (SW TIA Portál)
  • dobrou znalost MS Office, zejména Excel
  • samostatnost, iniciativu, spolehlivost a týmového ducha
  • ochotu cestovat do zahraničí
  • zájem o oblast digitalizace
  • znalost anglického nebo německého jazyka výhodou

Baví vás technika a nové technologie? Jste organizačně schopní a rádi komunikujete s lidmi? Přidejte se k nám! Hledáme zkušeného mechanického konstruktéra, který bude působit jako Projektový manažer pro prototypovou dílnu. Tento klíčový člen R&D týmu bude mít na starost koordinaci prací na prototypové dílně, koordinaci projektů s ostatními odděleními vývoje a spolupráci s odděleními napříč závodem. Bude zodpovědný za realizaci projektů v požadovaném termínu a kvalitě a často bude muset přidat ruku k dílu přímo na prototypové dílně.

Budete se věnovat především:

  • rozdělování a koordinaci práce na prototypové dílně
  • zajišťování komunikace a spolupráce s ostatními odděleními vývoje
  • zodpovědnosti za dodržení termínů a kvality realizovaných projektů
  • aktivní účasti na pracích na prototypové dílně dle potřeby
  • hledání nejvhodnějších technických řešení a jejich implementace

Můžete se těšit zejména na:

  • práci v perspektivním oboru
  • přátelský kolektiv a spolupráci se špičkovými odborníky
  • možnost osobního a profesního růstu
  • flexibilní pracovní dobu
  • moderní pracovní prostředí a přístup k nejnovějším technologiím
  • zajímavé projekty a prostor pro realizaci vlastních nápadů

Další benefity:

  • 5 týdnů dovolené
  • roční příspěvek ve výši min. 25.000 Kč na volnočasové aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • závodní jídelna v areálu firmy, příspěvek na stravování až 60 % ceny jídla
  • zvýhodněné nabídky pro zaměstnance
  • MultiSport karta
  • společenské a kulturní akce
  • a mnohé další

Měl/a byste mít:

  • VŠ vzdělání technického směru (ideálně strojírenství nebo příbuzný obor)
  • anglický jazyk na komunikativní úrovni
  • zkušenosti s prací v programu NX
  • schopnost samostatného rozhodování
  • otevřenou mysl a schopnost hledat inovativní technická řešení
  • dobré organizační a komunikační schopnosti
  • schopnost práce v týmu
  • výhodou: praxe na obdobné pozici, znalost automatizace, znalost německého jazyka

Jsme vývojový tým odštěpného závodu Innomotics. Vyvíjíme a vyrábíme motory pro kompresory, pumpy, jeřáby a jiná zařízení v náročných průmyslových aplikacích po celém světě. Můžete se s nimi setkat např. v chemickém, hutním průmyslu, tunelech nebo plošinách na moři. V tomto odvětví patříme k naprosté špičce a určujeme nové trendy. Naši projektoví manažeři spojují lidi, nápady a příležitosti. Jako vedoucí projektového týmu překonáváte překážky a bariéry, máte všechny náklady a termíny pod kontrolou a uvádíte věci do pohybu. Máte smysl pro nová řešení a znáte potenciál každého člena týmu. Rozumíte technologiím a dokážete lidi inspirovat a motivovat a v neposlední řadě dokážete taky dobře komunikovat. Dáváte do toho vše, abyste více než jen splňovali požadavky na bezpečnost, ochranu zdraví a ochranu životního prostředí. Podpoříme vás v každé situaci, kdekoli na světě a nabízíme vám příležitost k mimořádnému kariérního postupu. Staňte se součástí naší globální sítě.

Budete se věnovat především:

  • plánování a vedení vývojových projektů na základě specifických požadavků zákazníka
  • plánování a vedení inovačních projektů a úkolů zaměřených na zvýšení produktivity a snížení materiálových a výrobních nákladů
  • spolupráce s produktovým managmentem, nabídkovým oddělením a zákazníky
  • koordinaci aktivit mezi odbornými útvary napříč výrobními závody, vedení menšího projektového týmu o 5-10 členech
  • zodpovědnosti za dodržení termínů a rozpočtu projektů
  • prezentaci aktuálního stavu projektů
  • tvorbě projektové dokumentace

Můžete se těšit zejména na:

  • zajímavé projekty, spolupráci se špičkovými odborníky
  • využití cizích jazyků
  • nejnovější technologie a know-how v oblasti točivých elektrických strojů
  • aktivní spolupráci v mezinárodních vývojových týmech
  • přátelský kolektiv
  • seberealizaci v perspektivním odvětví

Další benefity:

  • místo výkonu práce: Frenštát pod Radhoštěm, Ostrava
  • zajímavé finanční ohodnocení
  • práci ve stabilní společnosti
  • možnost uplatnění v perspektivním oboru
  • systematickou podporu expertního rozvoje
  • otevřené možnosti expertního i manažerského růstu
  • flexibilní pracovní dobu
  • roční příspěvek do programu Benefit plus
  • příspěvek na stravování
  • 5 týdnů dovolené

Měl/a byste mít:

  • VŠ vzdělání technického směru
  • angličtinu pro každodenní komunikaci minimálně na úrovni B2
  • komunikační a prezentační znalosti
  • odolnost vůči stresu, time management
  • management rizik
  • obecnou znalost problematiky konstrukce
  • elektrických točivých strojů výhodou
  • orientaci na zákazníka a výsledek
  • rozhodnost, důslednost, analytické myšlení
  • techniky řízení a plánování projektů
  • ovládání příslušných nástrojů (MS Project, MS Office)

Naši projektoví manažeři propojují lidi, nápady a příležitosti. Jako vedoucí týmu překonávají překážky, mají pod kontrolou náklady a termíny. Vidí nové řešení a znají potenciál projektového týmu. Rozumíte technologiím a zároveň dokážete inspirovat a motivovat svoje okolí? Umíte skvěle komunikovat, ať už na úrovni týmu nebo managementu? Pak hledáme právě vás. Staňte se součástí naší globální sítě a pojďte s námi růst!

Budete se věnovat především:

  • plánovaní mezinárodních i lokálních vývojových projektů a samostatné realizaci, přičemž budete vždy dohlížet na termíny, náklady a funkce
  • prezentaci stavu projektu a další projektové dokumentaci
  • budete přebírat koordinační funkci v případě vývojových projektů napříč závody
  • sledování průběhu projektu a zajišťování jeho úspěšnosti
  • Jako projektový manažer našich inovativních vývojových projektů pro asynchronní motory a systémy motorů s integrovanými měniči povedete interdisciplinární projektový tým 8 až 12 zaměstnanců

Můžete se těšit zejména na:

  • jedinečnou příležitost pro profesní i osobní rozvoj
  • zajímavé a nové projekty, spolupráci se špičkovými odborníky nejen v ČR, ale i v zahraničí
  • nejnovější technologie, know how a moderní pracovní prostředí
  • vysokou míru samostatnosti a důvěry
  • flexibilitu v pracovní době a možnost home office
  • fajn tým, který drží při sobě a vzájemně se podporuje

Další benefity:

  • 5 týdnů dovolené
  • roční příspěvek ve výši 32.000 Kč na volnočasové aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • příspěvek na stravování
  • zvýhodněné nabídky a služby pro zaměstnance
  • společenské a kulturní akce
  • a mnohé další

Měl/a byste mít:

  • velkou výhodou jsou zkušenosti s vývojem el. zařízení nebo profesní zkušenosti v oblasti nízkonapěťových motorů a měničů
  • vysokoškolské vzdělání v technickém oboru
  • praxi jako člen projektového týmu nebo projektový manažer
  • anglický jazyk minimálně na úrovni B2
  • znalost technik řízení a plánování projektů a příslušných nástrojů (MS Project, MS Office)
  • výborné komunikační a prezentační dovednosti
  • schopnost efektivní organizace a práce v týmu

Your future responsibilities:

  • you are responsible that division quality targets were met by guiding the QM responsible people for products and productions in HVM
  • you are responsible for regular quality reporting, driving the KPIs (Key Performance Indicators) relevant for the respective project phases. In this way, you provide an overview of the current project status and identify critical situations at an early stage
  • you drive under quality matters special topics such as e.g. Escalations, Product Safety Suspicion, on demand and ensure that managers and employees have a quality-oriented mindset by promoting role models and sharing best practices focusing on digital solutions
  • you collaborate with the global QM&PS-network and business accountable units (e.g., R&D, Procurement, Factories, etc.) to achieve quality business goals for High Voltage Motors (HVM)
  • you ensure that division Instructions & Regulations (e.g. for PLM, QM&PS) are followed and regularly reviewed
  • you conduct internal audits and assessments (for the division), including preparation, definition and follow up of measures as well as participating (virtual or on-site) and supporting external audits such as e.g. ISO 9001
  • you prepare and conduct (annual) management reviews for the division as well as analyzing of the results of the customer satisfaction survey incl. follow-up of measures
  • finally, you ensure close cooperation and alignment with division support counterparts (guided by Headquarter PQ Team) as well as with country support

Extra benefits:

  • long-term cooperation
  • diverse work in an international environment
  • responsibility and the opportunity to influence and change
  • competitive salary
  • annual bonus
  • flexible working hours and 3 days working from home
  • broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • possible place of work: Drásov, Brno

Your profile:

  • the basis of your success is a completed Master's/University degree in Electronics / Mechatronics / Mechanics
  • building on this, you have already gained long-term professional experience in quality functions
  • furthermore, you are proficient in quality methods of risk analysis and quality planning (e.g. PQP, MQP, FMEA) as well as problem management (e.g. 8D, RCA)
  • you have a high level of technical expertise with the functionality of the motors as well as manufacturing and assembly technologies
  • in addition, you enjoy working in international teams and intercultural sensitivity rounds off your profile
  • personally, you convince with analytical skills, teamwork and assertiveness as well as a result-oriented way of working with a pronounced quality and customer orientation
  • you are a strong communicator and business fluent English; German would be a plus
  • the availability for worldwide business travels rounds your profile

Your future responsibilities:

  • you are responsible that division quality targets were met by guiding the QM responsible people for products and productions in HVM
  • you are responsible for regular quality reporting, driving the KPIs (Key Performance Indicators) relevant for the respective project phases. In this way, you provide an overview of the current project status and identify critical situations at an early stage
  • you drive under quality matters special topics such as e.g. Escalations, Product Safety Suspicion, on demand and ensure that managers and employees have a quality-oriented mindset by promoting role models and sharing best practices focusing on digital solutions
  • you collaborate with the global QM&PS-network and business accountable units (e.g., R&D, Procurement, Factories, etc.) to achieve quality business goals for High Voltage Motors (HVM)
  • you ensure that division Instructions & Regulations (e.g. for PLM, QM&PS) are followed and regularly reviewed
  • you conduct internal audits and assessments (for the division), including preparation, definition and follow up of measures as well as participating (virtual or on-site) and supporting external audits such as e.g. ISO 9001
  • you prepare and conduct (annual) management reviews for the division as well as analyzing of the results of the customer satisfaction survey incl. follow-up of measures
  • finally, you ensure close cooperation and alignment with division support counterparts (guided by Headquarter PQ Team) as well as with country support

Extra benefits:

  • long-term cooperation
  • diverse work in an international environment
  • responsibility and the opportunity to influence and change
  • competitive salary
  • annual bonus
  • flexible working hours and 3 days working from home
  • broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more
  • possible place of work: Drásov, Brno

Your profile:

  • the basis of your success is a completed Master's/University degree in Electronics / Mechatronics / Mechanics
  • building on this, you have already gained long-term professional experience in quality functions
  • furthermore, you are proficient in quality methods of risk analysis and quality planning (e.g. PQP, MQP, FMEA) as well as problem management (e.g. 8D, RCA)
  • you have a high level of technical expertise with the functionality of the motors as well as manufacturing and assembly technologies
  • in addition, you enjoy working in international teams and intercultural sensitivity rounds off your profile
  • personally, you convince with analytical skills, teamwork and assertiveness as well as a result-oriented way of working with a pronounced quality and customer orientation
  • you are a strong communicator and business fluent English; German would be a plus
  • the availability for worldwide business travels rounds your profile

In Information Technology we take care on digitalization of Innomotics processes. Before we write even a single line of code or customize the standard software product, we have to understand what drives our business. Only then we implement things on the technical side – trying, testing, and improving outcomes until a final solution emerges. We enjoy the freedom to think in completely new categories and to organize our own work. For us, knowledge means exchange – discussions with colleagues from all over the world. We feed our ideas into many sectors of the economy, thus creating the basis for innovative technical solutions. Join our team, and we will offer the necessary support to give you responsibility and enable you to have an international career. This position is intended for all candidates with knowledge of the MD-module and PP-module who want to further develop within these areas.

Your future responsibilities:

  • Exclusively to the internal customer – Innomotics.
  • Programming within the MD module with an overlap into the PP.
  • Programming in SAP ABAP environment and in BTP platform.
  • Material Master Data:
  • - understanding the structure and components of the Material Master data in SAP is fundamental. This includes knowledge of material types, views, and organizational levels. Familiarity with fields such as material description, unit of measure, valuation class, and storage location is necessary.
  • Variant Configuration:
  • - sales and distribution (SD) module processes related to variant configuration,
  • - product modeling: characteristics, classes, and dependencies,
  • - variant configuration profiles and configuration procedures,
  • - integration with Material Master data,
  • - business processes such as sales order configuration, production planning, and order fulfillment.
  • PDR (Product Development and Realization)
  • - functionality which allows Variant Configurator users to move entire VC models from one system to another ...
  • ALE (Application Link Enabling):
  • - technology used in SAP to transfer master and transactional data between different Logical Systems.
  • Exclusively to the internal customer – Innomotics.

What you can look forward to:

  • Active participation in migration from SAP ECC to S4/HANA.
  • An international team of programmers and experts.
  • Varied work and interesting projects, cooperation with top experts and their mentoring.
  • Digitization and automation of production plant processes Innomotics.
  • Participation in the development and administration of the company's central SAP systems of Innomotics.
  • Work-life balance (flexible working hours and possibility of home office).
  • Work in a friendly, open and informal team
  • Emuneration independent of utilization, but on realistic internal goals.
  • Development with an emphasis on quality and reliability.
  • Possibility of using and developing foreign languages within a multinational company.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have long-term experience in SAP MD and SAP PP, preferably already in S/4 Hana in cloud.
  • We welcome advanced knowledge in modern SW development approaches, state of the art interface and cloud technologies.
  • Knowledge of procurement processes in manufacturing companies is highly appreciated.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level English language skills round off your profile.

In Information Technology we take care on digitalization of Innomotics processes. Before we write even a single line of code or customize the standard software product, we have to understand what drives our business. Only then we implement things on the technical side – trying, testing, and improving outcomes until a final solution emerges. We enjoy the freedom to think in completely new categories and to organize our own work. For us, knowledge means exchange – discussions with colleagues from all over the world. We feed our ideas into many sectors of the economy, thus creating the basis for innovative technical solutions. Join our team, and we will offer the necessary support to give you responsibility and enable you to have an international career. This position is intended for all candidates with knowledge of the MD-module and PP-module who want to further develop within these areas.

Your future responsibilities:

  • Exclusively to the internal customer – Innomotics.
  • Programming within the MD module with an overlap into the PP.
  • Programming in SAP ABAP environment and in BTP platform.
  • Material Master Data:
  • - understanding the structure and components of the Material Master data in SAP is fundamental. This includes knowledge of material types, views, and organizational levels. Familiarity with fields such as material description, unit of measure, valuation class, and storage location is necessary.
  • Variant Configuration:
  • - sales and distribution (SD) module processes related to variant configuration,
  • - product modeling: characteristics, classes, and dependencies,
  • - variant configuration profiles and configuration procedures,
  • - integration with Material Master data,
  • - business processes such as sales order configuration, production planning, and order fulfillment.
  • PDR (Product Development and Realization)
  • - functionality which allows Variant Configurator users to move entire VC models from one system to another ...
  • ALE (Application Link Enabling):
  • - technology used in SAP to transfer master and transactional data between different Logical Systems.
  • Exclusively to the internal customer – Innomotics.

What you can look forward to:

  • Active participation in migration from SAP ECC to S4/HANA.
  • An international team of programmers and experts.
  • Varied work and interesting projects, cooperation with top experts and their mentoring.
  • Digitization and automation of production plant processes Innomotics.
  • Participation in the development and administration of the company's central SAP systems of Innomotics.
  • Work-life balance (flexible working hours and possibility of home office).
  • Work in a friendly, open and informal team
  • Emuneration independent of utilization, but on realistic internal goals.
  • Development with an emphasis on quality and reliability.
  • Possibility of using and developing foreign languages within a multinational company.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have long-term experience in SAP MD and SAP PP, preferably already in S/4 Hana in cloud.
  • We welcome advanced knowledge in modern SW development approaches, state of the art interface and cloud technologies.
  • Knowledge of procurement processes in manufacturing companies is highly appreciated.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level English language skills round off your profile.

In Information Technology we take care on digitalization of Innomotics processes. Before we write even a single line of code or customize the standard software product, we have to understand what drives our business. Only then we implement things on the technical side – trying, testing, and improving outcomes until a final solution emerges. We enjoy the freedom to think in completely new categories and to organize our own work. For us, knowledge means exchange – discussions with colleagues from all over the world. We feed our ideas into many sectors of the economy, thus creating the basis for innovative technical solutions. Join our team, and we will offer the necessary support to give you responsibility and enable you to have an international career. This position is intended for all candidates with knowledge of the MD-module and PP-module who want to further develop within these areas.

Your future responsibilities:

  • Exclusively to the internal customer – Innomotics.
  • Programming within the MD module with an overlap into the PP.
  • Programming in SAP ABAP environment and in BTP platform.
  • Material Master Data:
  • - understanding the structure and components of the Material Master data in SAP is fundamental. This includes knowledge of material types, views, and organizational levels. Familiarity with fields such as material description, unit of measure, valuation class, and storage location is necessary.
  • Variant Configuration:
  • - sales and distribution (SD) module processes related to variant configuration,
  • - product modeling: characteristics, classes, and dependencies,
  • - variant configuration profiles and configuration procedures,
  • - integration with Material Master data,
  • - business processes such as sales order configuration, production planning, and order fulfillment.
  • PDR (Product Development and Realization)
  • - functionality which allows Variant Configurator users to move entire VC models from one system to another ...
  • ALE (Application Link Enabling):
  • - technology used in SAP to transfer master and transactional data between different Logical Systems.
  • Exclusively to the internal customer – Innomotics.

What you can look forward to:

  • Active participation in migration from SAP ECC to S4/HANA.
  • An international team of programmers and experts.
  • Varied work and interesting projects, cooperation with top experts and their mentoring.
  • Digitization and automation of production plant processes Innomotics.
  • Participation in the development and administration of the company's central SAP systems of Innomotics.
  • Work-life balance (flexible working hours and possibility of home office).
  • Work in a friendly, open and informal team
  • Emuneration independent of utilization, but on realistic internal goals.
  • Development with an emphasis on quality and reliability.
  • Possibility of using and developing foreign languages within a multinational company.
  • Broad range of wellbeing offerings: 5 weeks holiday, e-voucher card - for meal vouchers, cafeteria Benefit Plus, discounted offers and more.
  • Possible place of work: Drásov, Frenštát, Mohelnice.

Your profile:

  • You successfully completed your degree in Computer science, mechanical- or electrical engineering or comparable education.
  • You have long-term experience in SAP MD and SAP PP, preferably already in S/4 Hana in cloud.
  • We welcome advanced knowledge in modern SW development approaches, state of the art interface and cloud technologies.
  • Knowledge of procurement processes in manufacturing companies is highly appreciated.
  • You are characterized by your communication techniques. You are used to working in international teams and convince us with your intercultural openness.
  • High level English language skills round off your profile.

Jste odborník na české daně a účetnictví? Baví vás čísla, domluvíte se anglicky a chcete profesně růst? Využijte příležitost stát se součástí globálního týmu daňových odborníků a přidejte se k nám!

Budete se věnovat především:

  • měsíční přípravě daňových přiznání k DPH
  • analýze příslušných právních předpisů v souladu s obecně platnými zákonnými požadavky v ČR
  • spolupráci se zástupci místních provozních jednotek a zainteresovanými stranami v příslušné funkční oblasti a s místními úřady a konzultanty
  • přípravě finančních výkazů ve spolupráci s kolegy a zajištění včasné platby daní
  • podílení se na všech významných rozhodnutích a iniciativách společnosti, vč. přezkoumání obchodních rozhodnutí s ohledem na daňový dopad
  • poskytování poradenství pro ostatní organizačn jednotky v oblasti působnosti
  • spolupráci s ostatními kolegy napříč společností nejen v České republice, ale i v zahraničí

Můžete se těšit zejména na:

  • skvělý tým a spolupráci s předními odborníky
  • moderní a příjemné pracovní prostředí
  • flexibilní pracovní dobu a možnost pracovat z domova
  • příležitost k profesnímu rozvoji a dalšímu vzdělávání
  • praktické využití anglického jazyka

Další benefity:

  • roční příspěvek ve výši 32.000 Kč na volnočasové
  • aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • 5 týdnů dovolené plus možnost dalších 5ti dnů volna navíc v rámci nabídky Benefit Plus
  • roční bonus
  • příspěvek na stravování
  • zvýhodněné nabídky a služby pro zaměstnance
  • MultiSport karta
  • jazykové a vzdělávací kurzy
  • a mnohé další

Měl/a byste mít:

  • alespoň 2 roky zkušeností z interního daňového oddělení nebo daňově poradenské firmy
  • odbornou znalost českých daní a účetních principů v oblasti DPH
  • všeobecnou znalost mezinárodních daňových principů
  • anglický jazyk na komunikativní úrovni
  • pokročilou znalost MS Office, zejména Excel
  • schopnost pracovat samostatně, aktivní přístup
  • dobré komunikační a prezentační dovednosti
  • ochotu učit se a vzdělávat
  • znalost SAP

Jste odborník na české daně a účetnictví? Baví vás čísla, domluvíte se anglicky a chcete profesně růst? Využijte příležitost stát se součástí globálního týmu daňových odborníků a přidejte se k nám!

Budete se věnovat především:

  • měsíční přípravě daňových přiznání k DPH
  • analýze příslušných právních předpisů v souladu s obecně platnými zákonnými požadavky v ČR
  • spolupráci se zástupci místních provozních jednotek a zainteresovanými stranami v příslušné funkční oblasti a s místními úřady a konzultanty
  • přípravě finančních výkazů ve spolupráci s kolegy a zajištění včasné platby daní
  • podílení se na všech významných rozhodnutích a iniciativách společnosti, vč. přezkoumání obchodních rozhodnutí s ohledem na daňový dopad
  • poskytování poradenství pro ostatní organizačn jednotky v oblasti působnosti
  • spolupráci s ostatními kolegy napříč společností nejen v České republice, ale i v zahraničí

Můžete se těšit zejména na:

  • skvělý tým a spolupráci s předními odborníky
  • moderní a příjemné pracovní prostředí
  • flexibilní pracovní dobu a možnost pracovat z domova
  • příležitost k profesnímu rozvoji a dalšímu vzdělávání
  • praktické využití anglického jazyka

Další benefity:

  • roční příspěvek ve výši 32.000 Kč na volnočasové
  • aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • 5 týdnů dovolené plus možnost dalších 5ti dnů volna navíc v rámci nabídky Benefit Plus
  • roční bonus
  • příspěvek na stravování
  • zvýhodněné nabídky a služby pro zaměstnance
  • MultiSport karta
  • jazykové a vzdělávací kurzy
  • a mnohé další

Měl/a byste mít:

  • alespoň 2 roky zkušeností z interního daňového oddělení nebo daňově poradenské firmy
  • odbornou znalost českých daní a účetních principů v oblasti DPH
  • všeobecnou znalost mezinárodních daňových principů
  • anglický jazyk na komunikativní úrovni
  • pokročilou znalost MS Office, zejména Excel
  • schopnost pracovat samostatně, aktivní přístup
  • dobré komunikační a prezentační dovednosti
  • ochotu učit se a vzdělávat
  • znalost SAP

Jste odborník na české daně a účetnictví? Baví vás čísla, domluvíte se anglicky a chcete profesně růst? Využijte příležitost stát se součástí globálního týmu daňových odborníků a přidejte se k nám!

Budete se věnovat především:

  • měsíční přípravě daňových přiznání k DPH
  • analýze příslušných právních předpisů v souladu s obecně platnými zákonnými požadavky v ČR
  • spolupráci se zástupci místních provozních jednotek a zainteresovanými stranami v příslušné funkční oblasti a s místními úřady a konzultanty
  • přípravě finančních výkazů ve spolupráci s kolegy a zajištění včasné platby daní
  • podílení se na všech významných rozhodnutích a iniciativách společnosti, vč. přezkoumání obchodních rozhodnutí s ohledem na daňový dopad
  • poskytování poradenství pro ostatní organizačn jednotky v oblasti působnosti
  • spolupráci s ostatními kolegy napříč společností nejen v České republice, ale i v zahraničí

Můžete se těšit zejména na:

  • skvělý tým a spolupráci s předními odborníky
  • moderní a příjemné pracovní prostředí
  • flexibilní pracovní dobu a možnost pracovat z domova
  • příležitost k profesnímu rozvoji a dalšímu vzdělávání
  • praktické využití anglického jazyka

Další benefity:

  • roční příspěvek ve výši 32.000 Kč na volnočasové
  • aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • 5 týdnů dovolené plus možnost dalších 5ti dnů volna navíc v rámci nabídky Benefit Plus
  • roční bonus
  • příspěvek na stravování
  • zvýhodněné nabídky a služby pro zaměstnance
  • MultiSport karta
  • jazykové a vzdělávací kurzy
  • a mnohé další

Měl/a byste mít:

  • alespoň 2 roky zkušeností z interního daňového oddělení nebo daňově poradenské firmy
  • odbornou znalost českých daní a účetních principů v oblasti DPH
  • všeobecnou znalost mezinárodních daňových principů
  • anglický jazyk na komunikativní úrovni
  • pokročilou znalost MS Office, zejména Excel
  • schopnost pracovat samostatně, aktivní přístup
  • dobré komunikační a prezentační dovednosti
  • ochotu učit se a vzdělávat
  • znalost SAP

Jste odborník na české daně a účetnictví? Baví vás čísla, domluvíte se anglicky a chcete profesně růst? Využijte příležitost stát se součástí globálního týmu daňových odborníků a přidejte se k nám!

Budete se věnovat především:

  • měsíční přípravě daňových přiznání k DPH
  • analýze příslušných právních předpisů v souladu s obecně platnými zákonnými požadavky v ČR
  • spolupráci se zástupci místních provozních jednotek a zainteresovanými stranami v příslušné funkční oblasti a s místními úřady a konzultanty
  • přípravě finančních výkazů ve spolupráci s kolegy a zajištění včasné platby daní
  • podílení se na všech významných rozhodnutích a iniciativách společnosti, vč. přezkoumání obchodních rozhodnutí s ohledem na daňový dopad
  • poskytování poradenství pro ostatní organizačn jednotky v oblasti působnosti
  • spolupráci s ostatními kolegy napříč společností nejen v České republice, ale i v zahraničí

Můžete se těšit zejména na:

  • skvělý tým a spolupráci s předními odborníky
  • moderní a příjemné pracovní prostředí
  • flexibilní pracovní dobu a možnost pracovat z domova
  • příležitost k profesnímu rozvoji a dalšímu vzdělávání
  • praktické využití anglického jazyka

Další benefity:

  • roční příspěvek ve výši 32.000 Kč na volnočasové
  • aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • 5 týdnů dovolené plus možnost dalších 5ti dnů volna navíc v rámci nabídky Benefit Plus
  • roční bonus
  • příspěvek na stravování
  • zvýhodněné nabídky a služby pro zaměstnance
  • MultiSport karta
  • jazykové a vzdělávací kurzy
  • a mnohé další

Měl/a byste mít:

  • alespoň 2 roky zkušeností z interního daňového oddělení nebo daňově poradenské firmy
  • odbornou znalost českých daní a účetních principů v oblasti DPH
  • všeobecnou znalost mezinárodních daňových principů
  • anglický jazyk na komunikativní úrovni
  • pokročilou znalost MS Office, zejména Excel
  • schopnost pracovat samostatně, aktivní přístup
  • dobré komunikační a prezentační dovednosti
  • ochotu učit se a vzdělávat
  • znalost SAP

Jsme celosvětový technický a obchodní tým zaměřený na prodej a servis pohonů (motory, frekvenční měniče, synchronní generátory a veškeré možné příslušenství). Náplní naší činnosti je prodej, technická podpora a servis pohonů pro zákazníky ve všech regionech světa. Našimi zákazníky jsou především koncoví uživatelé jako jsou elektrárny, teplárny, chemičky, doly, železárny, ale také OEM výrobci lodí, ropných plošin, čerpadel, ventilátorů, kompresorů a další. Naším úkolem/posláním je neustále posilovat pozici lídra trhu v oblasti dodávek a služeb pohonů a zajišťovat našim zákazníkům dostupnost produktů a služeb vyvíjených a vyráběných nejlepšími světovými technologiemi pro naše zákazníky. Přidejte se k nám a staňte se naším servisním expertem pro frekvenční měniče!

Budete se věnovat především:

  • uvádění pohonných systémů do provozu po celém světě a budete úzce spolupracovat v celosvětové síti odborníků a vývojářů
  • budete zodpovědní za testování a uvádění do provozu řešení pohonů sestávajících z frekvenčních měničů, řídicích systémů, motorů a pomocného řízení pro průmyslové aplikace v oblasti technologie velkých pohonů
  • po intenzivním zaškolení postupně převezmete větší zodpovědnost za uvádění sofistikovaných pohonů do provozu
  • kromě toho budete společně s vývojovými odděleními analyzovat a řešit specifické problémy společnosti, kontrolovat rozhraní / sítě k procesním a partnerským systémům
  • součástí vaší práce bude revize systémové dokumentace a také reporting včetně zpětné vazby pro inženýrské a vývojové oddělení
  • budete také konstruktivně pracovat při technické a ekonomické optimalizaci řešení a procesů

Můžete se těšit zejména na:

  • roční intenzivní zaškolení v Německu
  • 5 týdnů dovolené
  • flexibilní pracovní dobu
  • roční rozpočet do cafeterie do programu Benefit Plus
  • e-stravenky
  • možnost občasné práce z domova
  • zvýhodněné nabídky pro zaměstnance

Měl/a byste mít:

  • ukončené bakalářské nebo magisterské studium elektrotechniky, nejlépe se zaměřením na výkonovou elektroniku nebo techniku pohonů, případně středoškolské vzdělání s maturitou
  • počáteční znalosti o technologii pohonů a měničů výkonu (vysoko/nízkonapěťové měniče) - velkou výhodou
  • základní znalosti z řídicí techniky, výkonové elektroniky a elektrických strojů
  • orientaci na výsledek a zákazníka, komunikační dovednosti, asertivitu
  • velmi dobrou znalost angličtiny (němčina velkou výhodou)
  • ochota cestovat a pracovat po celém světě

Jsme celosvětový technický a obchodní tým zaměřený na prodej a servis pohonů (motory, frekvenční měniče, synchronní generátory a veškeré možné příslušenství). Náplní naší činnosti je prodej, technická podpora a servis pohonů pro zákazníky ve všech regionech světa. Našimi zákazníky jsou především koncoví uživatelé jako jsou elektrárny, teplárny, chemičky, doly, železárny, ale také OEM výrobci lodí, ropných plošin, čerpadel, ventilátorů, kompresorů a další. Naším úkolem/posláním je neustále posilovat pozici lídra trhu v oblasti dodávek a služeb pohonů a zajišťovat našim zákazníkům dostupnost produktů a služeb vyvíjených a vyráběných nejlepšími světovými technologiemi pro naše zákazníky.Přidejte se k nám a staňte se naším servisním expertem pro frekvenční měniče!

Budete se věnovat především:

  • uvádění pohonných systémů do provozu po celém světě a budete úzce spolupracovat v celosvětové síti odborníků a vývojářů
  • budete zodpovědní za testování a uvádění do provozu řešení pohonů sestávajících z frekvenčních měničů, řídicích systémů, motorů a pomocného řízení pro průmyslové aplikace v oblasti technologie velkých pohonů
  • po intenzivním zaškolení postupně převezmete větší zodpovědnost za uvádění sofistikovaných pohonů do provozu
  • kromě toho budete společně s vývojovými odděleními analyzovat a řešit specifické problémy společnosti, kontrolovat rozhraní / sítě k procesním a partnerským systémům
  • součástí vaší práce bude revize systémové dokumentace a také reporting včetně zpětné vazby pro inženýrské a vývojové oddělení
  • budete také konstruktivně pracovat při technické a ekonomické optimalizaci řešení a procesů

Můžete se těšit zejména na:

  • roční intenzivní zaškolení v Německu
  • 5 týdnů dovolené
  • flexibilní pracovní dobu
  • roční rozpočet do cafeterie do programu Benefit Plus
  • e-stravenky
  • možnost občasné práce z domova
  • zvýhodněné nabídky pro zaměstnance

Měl/a byste mít:

  • ukončené bakalářské nebo magisterské studium elektrotechniky, nejlépe se zaměřením na výkonovou elektroniku nebo techniku pohonů, případně středoškolské vzdělání s maturitou
  • počáteční znalosti o technologii pohonů a měničů výkonu (vysoko/nízkonapěťové měniče) - velkou výhodou
  • základní znalosti z řídicí techniky, výkonové elektroniky a elektrických strojů
  • orientaci na výsledek a zákazníka, komunikační dovednosti, asertivitu
  • velmi dobrou znalost angličtiny (němčina velkou výhodou)
  • ochota cestovat a pracovat po celém světě

Jsme celosvětový technický a obchodní tým zaměřený na prodej a servis pohonů (motory, frekvenční měniče, synchronní generátory a veškeré možné příslušenství). Náplní naší činnosti je prodej, technická podpora a servis pohonů pro zákazníky ve všech regionech světa. Našimi zákazníky jsou především koncoví uživatelé jako jsou elektrárny, teplárny, chemičky, doly, železárny, ale také OEM výrobci lodí, ropných plošin, čerpadel, ventilátorů, kompresorů a další. Naším úkolem/posláním je neustále posilovat pozici lídra trhu v oblasti dodávek a služeb pohonů a zajišťovat našim zákazníkům dostupnost produktů a služeb vyvíjených a vyráběných nejlepšími světovými technologiemi pro naše zákazníky.Přidejte se k nám a staňte se naším servisním expertem pro frekvenční měniče!

Budete se věnovat především:

  • uvádění pohonných systémů do provozu po celém světě a budete úzce spolupracovat v celosvětové síti odborníků a vývojářů
  • budete zodpovědní za testování a uvádění do provozu řešení pohonů sestávajících z frekvenčních měničů, řídicích systémů, motorů a pomocného řízení pro průmyslové aplikace v oblasti technologie velkých pohonů
  • po intenzivním zaškolení postupně převezmete větší zodpovědnost za uvádění sofistikovaných pohonů do provozu
  • kromě toho budete společně s vývojovými odděleními analyzovat a řešit specifické problémy společnosti, kontrolovat rozhraní / sítě k procesním a partnerským systémům
  • součástí vaší práce bude revize systémové dokumentace a také reporting včetně zpětné vazby pro inženýrské a vývojové oddělení
  • budete také konstruktivně pracovat při technické a ekonomické optimalizaci řešení a procesů

Můžete se těšit zejména na:

  • roční intenzivní zaškolení v Německu
  • 5 týdnů dovolené
  • flexibilní pracovní dobu
  • roční rozpočet do cafeterie do programu Benefit Plus
  • e-stravenky
  • možnost občasné práce z domova
  • zvýhodněné nabídky pro zaměstnance

Měl/a byste mít:

  • ukončené bakalářské nebo magisterské studium elektrotechniky, nejlépe se zaměřením na výkonovou elektroniku nebo techniku pohonů, případně středoškolské vzdělání s maturitou
  • počáteční znalosti o technologii pohonů a měničů výkonu (vysoko/nízkonapěťové měniče) - velkou výhodou
  • základní znalosti z řídicí techniky, výkonové elektroniky a elektrických strojů
  • orientaci na výsledek a zákazníka, komunikační dovednosti, asertivitu
  • velmi dobrou znalost angličtiny (němčina velkou výhodou)
  • ochota cestovat a pracovat po celém světě

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: physical final inspections of the parts before shipping at the supplier. Mainly inspection needs to be done on welded, machined and painted parts. Further the product related documentation needs to be checked, too
  • Ensuring and continuously improving supplier quality through qualification and development
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering
  • Proactively supporting of the commodity network and supplier evaluation
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies
  • Ensuring compliance with processes and target

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity
  • Opportunities for personal and professional growth
  • Flexi-time working hours and possibility of home office
  • Attractive financial package
  • 5 weeks holiday
  • Meal allowances
  • Cafeteria system Benefit + 32.000 CZK yearly

Your profile:

  • University/ high school degree in electrical or mechanical engineering
  • Experience in manufacture processes of big electrical machines or components
  • Knowledge of insulation materials for High Voltage machines (advantage)
  • Supplier audits according to ISO19011 preferable
  • Fluent English and Czech is a must, German or other languages are a plus
  • Experience and knowledge on welding is an adavantange
  • Driver license - active driver
  • Willingness to travel (up to 80%)
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: physical final inspections of the parts before shipping at the supplier. Mainly inspection needs to be done on welded, machined and painted parts. Further the product related documentation needs to be checked, too
  • Ensuring and continuously improving supplier quality through qualification and development
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering
  • Proactively supporting of the commodity network and supplier evaluation
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies
  • Ensuring compliance with processes and target

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity
  • Opportunities for personal and professional growth
  • Flexi-time working hours and possibility of home office
  • Attractive financial package
  • 5 weeks holiday
  • Meal allowances
  • Cafeteria system Benefit + 32.000 CZK yearly

Your profile:

  • University/ high school degree in electrical or mechanical engineering
  • Experience in manufacture processes of big electrical machines or components
  • Knowledge of insulation materials for High Voltage machines (advantage)
  • Supplier audits according to ISO19011 preferable
  • Fluent English and Czech is a must, German or other languages are a plus
  • Experience and knowledge on welding is an adavantange
  • Driver license - active driver
  • Willingness to travel (up to 80%)
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: physical final inspections of the parts before shipping at the supplier. Mainly inspection needs to be done on welded, machined and painted parts. Further the product related documentation needs to be checked, too
  • Ensuring and continuously improving supplier quality through qualification and development
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering
  • Proactively supporting of the commodity network and supplier evaluation
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies
  • Ensuring compliance with processes and target

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity
  • Opportunities for personal and professional growth
  • Flexi-time working hours and possibility of home office
  • Attractive financial package
  • 5 weeks holiday
  • Meal allowances
  • Cafeteria system Benefit + 32.000 CZK yearly

Your profile:

  • University/ high school degree in electrical or mechanical engineering
  • Experience in manufacture processes of big electrical machines or components
  • Knowledge of insulation materials for High Voltage machines (advantage)
  • Supplier audits according to ISO19011 preferable
  • Fluent English and Czech is a must, German or other languages are a plus
  • Experience and knowledge on welding is an adavantange
  • Driver license - active driver
  • Willingness to travel (up to 80%)
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners

We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: physical final inspections of the parts before shipping at the supplier. Mainly inspection needs to be done on welded, machined and painted parts. Further the product related documentation needs to be checked, too
  • Ensuring and continuously improving supplier quality through qualification and development
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering
  • Proactively supporting of the commodity network and supplier evaluation
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies
  • Ensuring compliance with processes and target

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity
  • Opportunities for personal and professional growth
  • Flexi-time working hours and possibility of home office
  • Attractive financial package
  • 5 weeks holiday
  • Meal allowances
  • Cafeteria system Benefit + 32.000 CZK yearly

Your profile:

  • University/ high school degree in electrical or mechanical engineering
  • Experience in manufacture processes of big electrical machines or components
  • Knowledge of insulation materials for High Voltage machines (advantage)
  • Supplier audits according to ISO19011 preferable
  • Fluent English and Czech is a must, German or other languages are a plus
  • Experience and knowledge on welding is an adavantange
  • Driver license - active driver
  • Willingness to travel (up to 80%)
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners

Your change engine. Motors and drives are our business, redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go! Do you want to shape the future of Innomotics with us? We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: Final inspection on electrical parts, major components of an electrical machine, like rotor, exciter rotor, stator and coils. Further the product related documentation needs to be checked, too.
  • Final inspection on electrical parts, major components of an electricl machine, like rotor, exciter rotors, stators and coils.
  • Ensuring and continuously improving supplier quality through qualification and development.
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering.
  • Proactively supporting of the commodity network and supplier evaluation.
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies.
  • Ensuring compliance with processes and target.

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity.
  • Opportunities for personal and professional growth.
  • Strenght and stability of Siemens company.
  • Flexi-time working hours and possibility of home office.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, equity program, corporate holiday resort in Vysočina)…

Your profile:

  • University/ high school degree in electrical or mechanical engineering.
  • Experience in manufacture processes of big electrical machines or components.
  • Knowledge of insulation materials for High Voltage machines (advantage).
  • Supplier audits according to ISO19011 preferable.
  • Fluent English is a must, German or other languages are a plus.
  • Experience and knowledge on welding is an adavantange.
  • Driver license - active driver. í
  • Willingness to travel (up to 80%).
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners.

Your change engine. Motors and drives are our business, redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go! Do you want to shape the future of Innomotics with us? We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: Final inspection on electrical parts, major components of an electrical machine, like rotor, exciter rotor, stator and coils. Further the product related documentation needs to be checked, too.
  • Final inspection on electrical parts, major components of an electricl machine, like rotor, exciter rotors, stators and coils.
  • Ensuring and continuously improving supplier quality through qualification and development.
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering.
  • Proactively supporting of the commodity network and supplier evaluation.
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies.
  • Ensuring compliance with processes and target.

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity.
  • Opportunities for personal and professional growth.
  • Strenght and stability of Siemens company.
  • Flexi-time working hours and possibility of home office.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, equity program, corporate holiday resort in Vysočina)…

Your profile:

  • University/ high school degree in electrical or mechanical engineering.
  • Experience in manufacture processes of big electrical machines or components.
  • Knowledge of insulation materials for High Voltage machines (advantage).
  • Supplier audits according to ISO19011 preferable.
  • Fluent English is a must, German or other languages are a plus.
  • Experience and knowledge on welding is an adavantange.
  • Driver license - active driver. í
  • Willingness to travel (up to 80%).
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners.

Your change engine. Motors and drives are our business, redefining reliable motion from check-time per day to uptime per lifecycle, from simply on/off to everything smart in between. Our most powerful engine: more than 15,000 dedicated experts, doers, colleagues. For them, engineering the future means keeping businesses in motion – in e-motion. We are the “we” in power – and we can empower you. 15,000 and counting. Are you looking for the stability of an established global player with the lean, innovative spirit of a mid-size hidden champion? That’s us! Are you looking to shape entire industries with a future-proof portfolio of more sustainable, energy efficient solutions? Deal, let’s go! Do you want to shape the future of Innomotics with us? We are looking for a self-starter with a digital, innovative and growth mindset who is ready to actively drive and shape our future company’s culture. We offer an environment full of opportunities to take on responsibility and to develop both personally and professionally. We value the diversity of our people because we know that innovation thrives when it is fueled by a variety of perspectives, skills, backgrounds and experiences. For us, nobody is perfect, but a team can be. #TeamInnomotics. About the team We are team of supplier quality experts. Our goal is to ensure continuous quality of steel suppliers for Siemens Dynamowerk in Berlin. Dynamowerk is a unique developer and manufacturer of special electrical motors up to 100 MW/680 tons. Our base is in Brno Czech Republic. We take pride in our international activity. The main commodities of our focus are electrical components of motors / generators (stator, rotor, insulation parts, coils etc.) Join us and become a member of our Supplier Quality Engineers team.

Your future responsibilities:

  • Main responsibility: Final inspection on electrical parts, major components of an electrical machine, like rotor, exciter rotor, stator and coils. Further the product related documentation needs to be checked, too.
  • Final inspection on electrical parts, major components of an electricl machine, like rotor, exciter rotors, stators and coils.
  • Ensuring and continuously improving supplier quality through qualification and development.
  • Supporting cross-functional cooperation between Procurement, Quality, Logistics, and Engineering.
  • Proactively supporting of the commodity network and supplier evaluation.
  • Facilitating supplier audits on site, investigating, analyzing and correcting quality discrepancies.
  • Ensuring compliance with processes and target.

What you can look forward to:

  • A truly international experience with a lot of time spent travelling and a challenging and perspective opportunity.
  • Opportunities for personal and professional growth.
  • Strenght and stability of Siemens company.
  • Flexi-time working hours and possibility of home office.
  • Attractive financial package.
  • Wide range of benefits (5 weeks holiday, meal allowances, Cafeteria system up to 15.000 CZK yearly, pension insurance contribution 1.400 CZK/month, equity program, corporate holiday resort in Vysočina)…

Your profile:

  • University/ high school degree in electrical or mechanical engineering.
  • Experience in manufacture processes of big electrical machines or components.
  • Knowledge of insulation materials for High Voltage machines (advantage).
  • Supplier audits according to ISO19011 preferable.
  • Fluent English is a must, German or other languages are a plus.
  • Experience and knowledge on welding is an adavantange.
  • Driver license - active driver. í
  • Willingness to travel (up to 80%).
  • You are a dedicated team player with strong communication and analytical skills interfacing with internal and external partners.

Jste technický typ a domluvíte se anglicky? Na oddělení zákaznického servisu nyní hledáme nového kolegu/kolegyni, který se s námi bude podílet na řešení zákaznických reklamací. Přidejte se k nám!

Budete se věnovat především:

  • řešení servisních požadavků zákazníků
  • řízení oprav, reklamací a koordinace nápravných opatření
  • komunikaci s kolegy z jiných regionů, zákazníky a servisními partnery

Můžete se těšit zejména na:

  • příležitost vhodnou i pro čerstvé absolventy
  • práci v týmu zkušených kolegů a jejich mentoring
  • pestrou práci a zajímavé projekty
  • každodenní využití cizího jazyka
  • možnost seberealizace
  • přátelský kolektiv

Další benefity:

  • 5 týdnů dovolené
  • flexibilní pracovní doba
  • roční příspěvek do cafeterie do programu Benefit plus
  • příspěvek na stravování
  • home office
  • Multisport karta
  • dobrovolnický den, společenské a kulturní akce
  • *místo výkonu práce: Frenštát

Měl/a byste mít:

  • min. SŠ vzdělání elektrotechnického zaměření
  • komunikativní znalost AJ nebo NJ
  • dobré komunikační a prezentační schopnosti
  • znalost MS Office
  • orientaci na zákazníka a výsledek
  • schopnost stále se učit novým věcem, rozhodnost a důslednost
  • řidičský průkaz sk. B

Jste technický typ a domluvíte se anglicky? Na oddělení Zákaznického servisu nyní hledáme nového kolegu, který se s námi bude podílet na řešení zákaznických reklamací. Přidejte se k nám!

Budete se věnovat především:

  • řešení servisních požadavků zákazníků
  • řízení oprav, reklamací a koordinace nápravných opatření
  • komunikaci s kolegy z jiných regionů, zákazníky a servisními partnery

Můžete se těšit zejména na:

  • příležitost vhodnou i pro čerstvé absolventy
  • práci v týmu zkušených kolegů a jejich mentoring
  • pestrou práci a zajímavé projekty
  • každodenní využití cizího jazyka
  • možnost seberealizace
  • přátelský kolektiv

Další benefity:

  • 5 týdnů dovolené
  • roční příspěvek ve výši 32.000 Kč na volnočasové aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • závodní jídelna v areálu firmy, příspěvek na stravování
  • zvýhodněné nabídky pro zaměstnance
  • MultiSport karta
  • odměny za dlouhodobý pracovní výkon až 40.000 Kč
  • flexibilní pracovní doba (s pevným základem 9 - 14 hod.)
  • možnost využití home office
  • společenské a kulturní akce
  • a mnohé další

Měl/a byste mít:

  • min. SŠ vzdělání technického zaměření nebo praxi na obdobné pozici
  • komunikativní znalost AJ nebo NJ
  • dobré komunikační a prezentační schopnosti
  • znalost MS Office
  • orientaci na zákazníka a výsledek
  • schopnost stále se učit novým věcem, rozhodnost a důslednost

Chcete se stát součástí týmu technologů ve společnosti Innomotics, s.r.o., odštěpný závod Elektromotory Frenštát a podílet se tak na navrhování, vývoji a realizaci nových technologií? Jsme špička v automatizaci výroby elektromotorů. Zájem o moderní techniku a neustálé hledání nových technologických trendů je u nás samozřejmostí. Standardní elektromotory z našeho závodu pohání kompresory, pumpy a jeřáby po celém světě. Mimo to umíme navrhnout a vyrobit motory do nejnáročnějších prostředí – s těmi se pak setkáte v hutním průmyslu, tunelech nebo plošinách na moři. V tomto odvětví patříme mezi nejlepší a určujeme nové trendy. Do sehraného týmu odborníků v dané oblasti hledáme Technologa obrábění komponent elektromotorů.

Budete se věnovat především:

  • přípravě výroby a tvorbě technologických programů pro CNC obráběcí stroje
  • tvorbě technologických postupů a související dokumentace, předepisování pomocných výrobních prostředků, stanovování norem spotřeby času
  • navrhování nových pracovišť, přesunům výroby a trvalému zlepšování stávající technologie s ohledem na kapacitu, výrobní portfolio a minimalizaci nákladů
  • technologickému vývoji, sledování technologických trendů a určování směru vývoje v oblasti své působnosti
  • realizaci technické části poptávkových a výběrových řízení
  • komunikaci s dodavateli nových technologií

Další benefity:

  • 5 týdnů dovolené
  • flexibilní pracovní doba
  • roční příspěvek do cafeterie do programu Benefit plus
  • závodní jídelna v areálu firmy
  • Multisport karta
  • dobrovolnický den, společenské a kulturní akce
  • místo výkonu práce: Frenštát pod Radhoštěm

Měl/a byste mít:

  • minimálně středoškolské vzdělání strojního oboru
  • praxe v oblasti obrábění, především soustružení a frézování
  • technické myšlení, schopnost čtení technických výkresů
  • znalost programování CNC strojů v ISO kódu
  • znalost CAM software např. NX, Pro/E, Exapt; praktické zkušenosti výhodou
  • uživatelskou znalost práce na PC, MS Office, znalost SAP R3 výhodou
  • znalost anglického jazyka, německý jazyk výhodou
  • časovou flexibilitu
  • nadšení a zájem o technické novinky
  • chuť zapadnout do dobře fungujícího týmu
  • organizační a komunikační schopnosti
  • schopnost samostatné i týmové práce
  • řidičský průkaz skupiny B

Jsme tým Centrální údržby firmy Innomotics s.r.o., o.z. Elektromotory Drásov. Naše firma vyrábí velké elektromotory a generátory na míru zákazníkům z celého světa. V našem oddělení je práce založena na zajišťování chodu, údržby a oprav strojního a dalšího zařízení. Hledáme někoho, kdo naše oddělení údržby posune dál, zcela novým směrem.

Budete se věnovat především:

  • budete mít na starosti analýzu a implementaci automatizace a digitalizace na procesů na oddělení Maintenance Managementu
  • budete mít na starosti implementaci digitalizace oprav a predikce poruch
  • budete metodicky řídit pracovníky údržby
  • budete zodpovídat za stav svěřeného strojního zařízení, zpracovávat harmonogram preventivních prohlídek strojů, sledovat jejich dodržování, dále zpracovávat kompletní podklady pro celkovou přípravu oprav strojů a zařízení, včetně zajištění náhradních dílů
  • budete úzce spolupracovat při investicích do modernizace nebo celkové obměny strojního zařízení
  • budete komunikovat se zástupci výroby, určovat priority oprav, v případě potřeby domlouvat servis externích firem

Můžete se těšit zejména na:

  • zaměstnání ve firmě, která propojuje teorii s praxí
  • prostor pro vlastní iniciativu
  • možnost rozvíjet se a vzdělávat sebe i celý tým
  • kariérní růst v rámci oddělení ale i v rámci firmy
  • zaměstnání ve stabilní firmě, která je na trhu více než 100 let
  • solidní finanční ohodnocení

Další benefity:

  • 5 týdnů dovolené
  • pracovní dobu 7,5 hodiny denně + 30 minut na oběd
  • flexibilní pracovní dobu s pevným jádrem
  • příspěvek na stravování a jídelnu uvnitř závodu
  • 32.000,- Kč ročně do cafeterie Benefit +
  • sportovní a kulturní akce
  • Multisport kartu

Měl/a byste mít:

  • zkušenost s vedením údržby ve výrobním závodě
  • zkušenost se zaváděním digitalizace
  • všeobecná orientace v oboru strojírenství
  • zkušenost s vedením lidí
  • znalost MS Office
  • znalost anglického jazyka na úrovni B2, komunikativní znalost ČJ
  • aktivní přístup a komunikativnost
  • znalost hydraulických a pneumatických systémů výhodou
  • řidičský průkaz sk. B

Máte elektrotechnické vzdělání a zájem o kariérní růst? Využijte příležitost připojit se k týmu profesionálů na oddělení vývoje a pojďte s námi měnit svět.

Budete se věnovat především:

  • provádění specializovaných měření elektrických parametrů elektromotoru dle platných mezinárodních norem a předpisů
  • měření elektromotorů napájených z frekvenčních měničů
  • zpracovávání a vyhodnocení naměřených dat
  • realizaci zákaznických přejímek
  • podílení se na realizaci interních a externích auditů na podnikové zkušebně
  • aplikaci nových norem do měřících metod
  • spolupráci na nových vývojových projektech

Můžete se těšit zejména na:

  • nejnovější technologie a know-how
  • zajímavé projekty, spolupráci se špičkovými odborníky
  • přátelský kolektiv s nadšením pro motory a podporu v začátcích

Další benefity:

  • roční příspěvek ve výši 27.000 Kč na volnočasové aktivity, kulturu, sport a penzijní či životní připojištění v rámci nabídky Benefit Plus
  • závodní jídelna v areálu firmy, příspěvek na stravování
  • 5 týdnu dovolené
  • a mnohé další

Měl/a byste mít:

  • min. SŠ vzdělání v oboru elektrotechnika
  • alespoň základní znalost AJ
  • znalost MS Office
  • osvědčení Elektrotechnik dle § 6 NV c. 194/2022 Sb
  • zájem o kariérní růst
  • dobré komunikační a organizační schopnosti
  • osobní iniciativu a časovou flexibilitu
  • schopnost týmové práce
  • VŠ vzdělání výhodou

Kontaktní formulář


Váháte, která pozice je pro vás nejvhodnější? Dejte nám na sebe kontakt a my se vám ozveme.
Probíhá odesílání...

Kontaktujte nás sami


Mohelnice

Dělnické pozice

THP pozice

Frenštát p. R. / Ostrava

Drásov

Dělnické pozice

THP pozice

Praha/Brno

Ohledně pozic pro lokality Praha a Brno kontaktujte kteroukoliv z našich personalistek.